M.A. Ford
M.A. Ford 2XDCE2756A Twister Xd Drill 12X-25X Coolant Fed 7.00Mm
A coolant-fed drill for 12X to 25X applications with a 7.00 mm diameter
- Drills 12X-25X depth for deep-hole capability
- Coolant-fed design clears chips for clean cuts
- 00 mm diameter suits precise metric tasks
- Twister XD geometry boosts drilling efficiency
- California Prop 65 warning informs safe handling
7.00 mm Twister XD drill for deep holes
The M.A. Ford 2XDCE2756A Twister XD drill is a coolant-fed carbide tool built for 12x to 25x diameter drilling depths. It targets machine shops and production lines that need accurate deep-hole performance in a 7.00 mm diameter. Buyers who need larger diameters or non-coolant-fed geometries should select a different tool.
Coolant-fed shank requires through-spindle supply
Installation is straightforward on any CNC or machining centre equipped with through-spindle coolant delivery. The shank fits standard tool holders for this diameter. Problems arise when the machine lacks adequate coolant pressure or filtration, which can cause chip packing and premature wear at depth.
12x to 25x diameter drilling depth range
The defining specification is the 12x to 25x diameter drilling depth capability enabled by the internal coolant channel. This range determines whether the drill reaches your required hole depth in a single pass. Verify your application falls within this multiple of the 7.00 mm diameter before ordering.
Highlights
- Drills 12X-25X depth for deep-hole capability
- Coolant-fed design clears chips for clean cuts
- 00 mm diameter suits precise metric tasks
- Twister XD geometry boosts drilling efficiency
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I verify the 7.00 mm Twister Xd Drill is drilling true after setup?
Run a test hole in the intended material, measure the bore diameter and check for straightness; consistent 7.00 mm results confirm the drill is working as intended.
What comes in the box with the 2XDCE2756A and what must I supply separately?
The box contains the 7.00 mm Twister Xd Drill only; you must provide a compatible coolant-fed holder, coolant supply and a machine spindle that accepts the shank.
Which Twister Xd variant should I choose for a 12× to 25× depth-to-diameter range?
The 2XDCE2756A is built for 12×–25× depth-to-diameter ratios, so select this model when your holes fall in that range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
