M.A. Ford
M.A. Ford 2XDCE2500A Twister Xd Drill 12X-25X Coolant Fed 6.35mm
Coolant-fed Twister XD drill covers 12x to 25x diameter depths at 6.35 mm
- Twister Xd design enables 12X-25X drilling depths
- Coolant-fed operation improves chip evacuation and tool life
- 35 mm diameter suits precision holemaking tasks
- M.A. Ford manufacturing delivers professional-grade cutting performance
- California Proposition 65 warning indicates regulated chemical content
Twister Xd Drill 12X-25X Coolant Fed
The M.A. Ford 2XDCE2500A Twister Xd Drill is a coolant-fed cutting tool designed for drilling depths between 12 and 25 times the diameter. It targets machinists and maintenance teams who need reliable deep-hole performance in metalworking applications. The 6.35mm diameter suits specific precision drilling requirements.
Coolant-Fed Deep-Hole Drilling Integration
This drill requires a machine spindle or holder capable of delivering coolant through the tool body to the cutting zone. Internal coolant evacuation clears chips from deep holes, reducing the need for frequent peck cycles and protecting the cutting edges during extended cuts. The design frees the operator from manual chip removal interruptions.
Suited For Dedicated Deep-Hole Operations
The tool suits shops running repeatable deep-hole jobs in compatible materials where through-coolant capability exists. It is not for buyers needing a standard twist drill for shallow holes, those without through-spindle coolant supply, or applications requiring diameters or length ratios outside the 12X-25X range.
Highlights
- Twister Xd design enables 12X-25X drilling depths
- Coolant-fed operation improves chip evacuation and tool life
- 35 mm diameter suits precision holemaking tasks
- M.A. Ford manufacturing delivers professional-grade cutting performance
- California Proposition 65 warning indicates regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 12X-25X coolant-fed flute drill before chip evacuation becomes the limiting factor?
The 12X-25X flute length ratio lets the 6.35 mm Twister XD drill up to 25 times its diameter in a single pass, so chip evacuation remains effective to the full rated depth.
Does the coolant-fed 2XDCE2500A run hotter or draw more spindle power when drilling continuously at the 25X depth?
Internal coolant delivery flushes heat from the cut zone, keeping spindle load and tool temperature stable even during extended 25X-depth cycles.
What machine spindle and coolant system are required to run this 6.35 mm Twister XD drill?
A CNC or rigid milling spindle with through-spindle coolant capability and a minimum 6.35 mm collet or chuck capacity is needed to use the 2XDCE2500A.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
