M.A. Ford
M.A. Ford 2XDCE2480A Twister Xd Drill 12X-25X Coolant Fed 6.30Mm
Coolant-fed Twister XD drill operates at 12X-25X diameter depths with 6.30mm cutting size
- Twister XD drill reaches 12X to 25X diameter depth capability
- Coolant-fed design delivers lubrication directly to the cutting zone
- 30 mm diameter suits precise holemaking tasks
- M.A. Ford brand backs professional-grade cutting tool performance
- California Proposition 65 warning identifies chemical exposure risk
M.A. Ford Twister XD 6.30 mm Coolant-Fed Drill
The M.A. Ford 2XDCE2480A Twister XD is a solid-carbide drill designed for high-performance holemaking with through-coolant delivery. Its 12X to 25X diameter-to-length range supports deep drilling in a single pass. The 6.30 mm cutting diameter suits precise metric sizing requirements.
Machinists needing deep-hole capability in one
This drill serves shops producing deep holes in steels, stainless steels and high-temperature alloys where coolant-through tooling is mandatory. It is not suited for hand-held drilling or machines without through-spindle coolant. Buyers needing larger diameters or different length ratios must select another tool.
6.30 mm diameter with 12X–25X depth range
The 6.30 mm cutting diameter combined with the 12X to 25X depth capability determines whether this drill reaches your required hole depth in a single pass. Verify the exact depth needed against this range before ordering. The tool carries a California Proposition 65 warning for cancer and reproductive harm.
Highlights
- Twister XD drill reaches 12X to 25X diameter depth capability
- Coolant-fed design delivers lubrication directly to the cutting zone
- 30 mm diameter suits precise holemaking tasks
- M.A. Ford brand backs professional-grade cutting tool performance
- California Proposition 65 warning identifies chemical exposure risk
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 12X-25X depth range mean when the drill is in the machine?
It indicates the drill can produce holes from 12 to 25 times the 6.30 mm diameter in a single pass with coolant feed.
What shank standard does the 2XDCE2480A use and what does it limit?
The drill uses a standard round shank that fits common collets and holders, limiting use to machines with compatible clamping.
What physical clearance does the 6.30 mm Twister XD drill need to mount?
It requires a holder or collet that accepts a 6.30 mm shank and enough spindle travel for the 12X-25X flute length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
