M.A. Ford
M.A. Ford 2XDCE2126A Twister Xd Drill 12X-25X Coolant Fed 5.40mm
Coolant-fed Twister XD drill covers 12× to 25× diameter depths at 5.40 mm
- Drills 12 to 25 diameters deep with internal coolant feed
- 40 mm diameter suits precise hole-making tasks
- Twister XD geometry reduces cutting forces for longer tool life
- Coolant-fed design evacuates chips efficiently in deep holes
- M.A. Ford manufacturing ensures consistent performance in demanding applications
Twister Xd Drill for deep-hole drilling
The M.A. Ford Twister Xd Drill is a coolant-fed cutting tool designed for drilling depths between 12 and 25 times the diameter. It targets machinists and maintenance teams who need reliable deep-hole performance in metalworking applications. The 5.40 mm diameter suits precise hole-making tasks where standard drills cannot reach.
Heat removal and cutting stability
Internal coolant channels deliver fluid directly to the cutting zone, reducing heat buildup during extended drilling cycles. This design helps maintain consistent cutting temperatures and evacuates chips efficiently from deep holes. Stable thermal conditions lower the risk of tool failure and improve hole quality in tough materials.
Integration with coolant-fed holders
The drill requires a machine spindle and tool holder capable of supplying high-pressure coolant through the shank. Compatibility with through-coolant systems is essential for the drill to function as intended. Users must verify their existing setup provides adequate coolant pressure and flow for the 12X-25X depth range.
Highlights
- Drills 12 to 25 diameters deep with internal coolant feed
- 40 mm diameter suits precise hole-making tasks
- Twister XD geometry reduces cutting forces for longer tool life
- Coolant-fed design evacuates chips efficiently in deep holes
- M.A. Ford manufacturing ensures consistent performance in demanding applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 2XDCE2126A Twister Xd Drill in a coolant-fed holder, and what step is often missed?
Secure the 5.40 mm shank in a compatible coolant-fed holder, ensure the internal coolant passages align, then torque the holder to the machine specification — the step often missed is verifying coolant flow through the drill before starting the cycle.
What maintenance or replacement will the 2XDCE2126A Twister Xd Drill need after extended use?
The cutting edges will dull and require professional regrinding to the original 12X-25X geometry; replace the drill when regrinding can no longer maintain the 5.40 mm diameter tolerance.
What limit appears first on the 2XDCE2126A Twister Xd Drill during sustained high-feed drilling?
The 12X-25X length-to-diameter ratio makes chip evacuation the first limit; if coolant pressure or volume drops, chips pack the flutes and the drill will overheat or break.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
