M.A. Ford
M.A. Ford 16550000C Tuffcut Gp 4 Flute Ball Nose End Mill Stub 1/2 pneumatic accessory
Four-flute ball-nose end mill for stub milling operations in a 1/2 size
- M.A. Ford brand ensures professional-grade tool reliability
- Four-flute design delivers smoother cuts in milling operations
- Ball-nose geometry enables precise contouring and profiling
- Stub length provides rigidity for reduced deflection
- California Prop 65 warning discloses regulated chemical content
Tuffcut Gp 4 Flute Ball Nose End Mill
This M.A. Ford 16550000C is a 4 flute ball nose end mill with a stub length design for rigid cutting performance. It suits machinists and fabricators profiling contoured surfaces or finishing 3D contours in a variety of materials. The tool is supplied new and ships directly from the manufacturer.
Upgrading from general-purpose end mills
Switching to this geometry is worthwhile when you need stronger chip evacuation and reduced deflection on pocketing or contouring passes. The 4 flute configuration and stub length combine to increase rigidity compared to longer or fewer-flute alternatives, improving finish quality on harder workpiece materials.
Verify shank compatibility and material suitability
Confirm your tool holder accepts the 1/2 inch shank diameter before ordering. Review the California Proposition 65 notices regarding chemical exposure risks during machining operations. Ensure your machine spindle speed and feed rates match the cutter diameter and workpiece hardness for safe operation.
Highlights
- M.A. Ford brand ensures professional-grade tool reliability
- Four-flute design delivers smoother cuts in milling operations
- Ball-nose geometry enables precise contouring and profiling
- Stub length provides rigidity for reduced deflection
- California Prop 65 warning discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 16550000C end mill need to fit my tool holder?
The cutter has a 1/2 inch shank, so it requires a 1/2 inch collet, end-mill holder or shrink-fit chuck with a matching bore.
How do I install the 16550000C without damaging the flutes, and what step is most often missed?
Clean the shank and holder bore, insert the shank fully, and torque the collet nut to the holder manufacturer's spec; the step most often missed is verifying the shank is fully seated before tightening.
When should I replace the 16550000C ball-nose cutter?
Replace it when the ball radius shows visible chipping, when flank wear on the flutes becomes pronounced, or when surface finish deteriorates despite correct feeds and speeds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
