M.A. Ford
M.A. Ford 16503120 Tuffcut Gp 4 Flute Ball Nose End Mill Stub 1/32 pneumatic accessory
A four-flute ball-nose end mill with a 1/32 inch stub for precision contour milling
- 4-flute design improves chip evacuation for smoother cuts
- Ball nose profile enables precise 3D contouring and profiling
- Stub length increases rigidity to reduce deflection
- 1/32 inch diameter suits fine detail machining tasks
- Manufactured by M.A. Ford for professional quality
TuffCut GP 4-Flute Ball Nose End Mill
The M.A. Ford 16503120 is a solid-carbide rotary cutter designed for contouring and profiling in CNC and manual milling machines. Its four-flute geometry and ball-nose profile suit general-purpose machining across steel, cast iron and non-ferrous alloys. The stub length increases rigidity for shallow-pocket work. This accessory targets machinists and maintenance shops needing a durable, small-diameter finishing tool.
1/32-Inch Diameter Capacity and Headroom
The 1/32-inch cutting diameter handles fine-detail cavities, tight radii and light finishing passes where larger tools cannot reach. Four flutes provide smooth surface finishes at moderate feed rates in medium-hardness materials. The short flute length limits depth of cut, so deep pockets or tall walls require a longer-reach tool. Heavy roughing or high-material-removal rates will exceed the tool’s structural headroom.
Stub-Length Shank Fit and Workflow Impact
The stub-length shank fits standard ER collets, Weldon flats or shrink-fit holders without special adapters, freeing up spindle clearance for fixturing or multi-axis access. Solid carbide construction allows higher spindle speeds than high-speed steel equivalents, reducing cycle time on finishing passes. Shops without high-rpm spindles or rigid toolholding may not realise the full speed advantage. The tool arrives new and ready for immediate use.
Highlights
- 4-flute design improves chip evacuation for smoother cuts
- Ball nose profile enables precise 3D contouring and profiling
- Stub length increases rigidity to reduce deflection
- 1/32 inch diameter suits fine detail machining tasks
- Manufactured by M.A. Ford for professional quality
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 1/32 stub length of the 16503120 fit in the same collet as my older 1/8 shank tools?
The 1/32 diameter requires a matching collet or adapter; it will not seat in a 1/8 collet.
How can I confirm the four-flute ball nose is cutting correctly after install?
Listen for smooth, even engagement and inspect the finished radius for a consistent, chatter-free surface.
Does the box include a collet or holder for the 1/32 shank, or must I buy one separately?
Only the end mill is supplied; a compatible collet or holder for the 1/32 shank must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
