M.A. Ford
M.A. Ford 156M0800N30A 8.0 mm ball nose end mill
Two-flute ball-nose end mill with 8.0 mm cutting diameter and necked shank for deep contour milling
- TypeCutting Tools
- 8 mm cutting diameter for precise ball-nose profiling
- Two-flute design gives efficient chip clearance in deep slots
- 30 mm neck length provides extended reach in cavities
- TuffCut DM coating resists wear on tough materials
- California Prop 65 notice lists cancer and reproductive-hazard chemicals
8.0 mm ball nose end mill
The M.A. Ford 156M0800N30A is a TuffCut DM series cutting tool designed for precision milling operations. Its 2 flute ball nose geometry with a necked profile suits contouring and finishing tasks in various materials. This new end mill serves machinists and fabricators requiring accurate 3D profiling capabilities.
California Proposition 65 compliance
This product carries warnings under California Proposition 65 for chemicals known to cause cancer and birth defects or reproductive harm. Users should review safety data sheets and follow appropriate handling procedures. Standard workshop ventilation and personal protective equipment are recommended during machining operations.
Sustained cutting performance
The necked design provides extended reach for deep cavity work while maintaining tool rigidity during prolonged engagement. Two flute construction allows efficient chip evacuation in continuous cutting cycles. Direct manufacturer shipping ensures product integrity for consistent performance across production runs.
Highlights
- 8 mm cutting diameter for precise ball-nose profiling
- Two-flute design gives efficient chip clearance in deep slots
- 30 mm neck length provides extended reach in cavities
- TuffCut DM coating resists wear on tough materials
- California Prop 65 notice lists cancer and reproductive-hazard chemicals
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
How do I install the 8.0 mm ball nose end mill in a collet and what step is often missed?
Clean the 8.0 mm shank and collet bore thoroughly, insert the shank to the full grip length, and torque the collet nut to the holder’s specified value — skipping the cleaning step causes runout.
What maintenance or replacement will the 156M0800N30A need during its service life?
The 2-flute carbide cutting edges will dull; plan to resharpen or replace the tool once flank wear reaches the shop’s tolerance limit.
What limit appears first on the 8.0 mm necked ball nose during sustained profiling cuts?
The 8.0 mm neck diameter limits reach and rigidity, so deflection and chatter become the controlling factor before flute wear dominates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
