M.A. Ford
M.A. Ford 156M0060N4A garden statue
Micro 0.60 mm ball-nose end mill with two flutes and a necked design for precise contour milling
- TypeCutting Tools
- Precision ball-nose profile enables smooth 3D contouring
- Two-flute design promotes efficient chip evacuation in tight spaces
- Necked shank provides extended reach for deep cavities
- 60 mm cutting diameter suits micro-machining applications
- TuffCut DM series built for hardened steels and exotic alloys
Precision milling tool
The M.A. Ford 156M0060N4A is a 2 flute ball nose end mill with a necked design and .60 mm cutting diameter. It is intended for machinists and CNC operators performing detailed contouring, profiling or finishing work in a variety of materials. This cutting tool suits users who need a small-diameter ball profile for intricate three-dimensional shapes.
Setup verification
Confirm that your machine spindle and tool holder can accommodate the shank and overall length of this necked end mill. Check that the .60 mm diameter matches the feature size and step-over requirements of your programmed toolpaths. Verify workpiece material compatibility and that your coolant or lubrication method is appropriate for the cutter geometry.
Daily use
The necked profile provides extended reach for deep cavities while maintaining rigidity near the cutting edges. Two flutes allow efficient chip evacuation during profiling passes, reducing the risk of re-cutting chips in tight corners. California Proposition 65 warnings indicate the product contains chemicals known to cause cancer and reproductive harm, so follow standard shop safety practices including proper ventilation and personal protective equipment.
Highlights
- Precision ball-nose profile enables smooth 3D contouring
- Two-flute design promotes efficient chip evacuation in tight spaces
- Necked shank provides extended reach for deep cavities
- 60 mm cutting diameter suits micro-machining applications
- TuffCut DM series built for hardened steels and exotic alloys
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
Does the 156M0060N4A come as a single cutter or in a pack, and are shanks or holders included?
The product is sold as one 2 flute ball nose end mill with a 0.60 mm diameter; shanks or tool holders are not included and must be sourced separately.
Should I choose this 0.60 mm necked version or a larger diameter for my job?
Select the 0.60 mm necked cutter when you need fine detail and reach in tight corners; move to a larger diameter only if the feature size and rigidity requirements demand it.
What does the 0.60 mm diameter mean for actual milling performance?
A 0.60 mm ball nose gives a very small radius of cut, suitable for high-detail finishing passes, but it limits material removal rate and requires light feed rates to avoid tool deflection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
