M.A. Ford
M.A. Ford 15609371A Garden Statue
A two-flute ball-nose end mill with a 3/32 inch cutting diameter for precision milling
- TypeCutting Tools
- Precision milling with 2-flute ball nose design
- Necked shank for deep-reach cutting access
- TuffCut DM series built for demanding materials
- 3/32 inch diameter for fine detail work
- California Prop 65 chemical warning applies
M.A. Ford 15609371A End Mill
The M.A. Ford 15609371A is a two-flute ball nose end mill with a necked design and a 3/32 cutting diameter. It is intended for machinists and manufacturers who need a small-radius tool for contouring, profiling and finishing operations in a variety of materials.
Upgrade from standard stub tools
This necked cutter replaces shorter-reach end mills when deep cavities or steep walls prevent a standard shank from clearing the workpiece. The extra reach is worth it when the feature depth exceeds the flute length of a conventional tool and tool deflection must be kept low.
Limits of the necked geometry
The reduced diameter behind the flutes limits the maximum axial depth of cut before the shank contacts the part. Users must verify that the neck length matches the specific cavity depth required, as the tool cannot be used beyond its relieved section.
Highlights
- Precision milling with 2-flute ball nose design
- Necked shank for deep-reach cutting access
- TuffCut DM series built for demanding materials
- 3/32 inch diameter for fine detail work
- California Prop 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
What shank diameter does the 15609371A end mill need to fit my collet?
The tool has a 3/32 inch shank, so use a matching collet or holder.
How do I install the necked ball nose cutter without breaking the neck?
Clamp the shank only, keep the neck clear of the holder, and tighten evenly.
When should I replace this diamond-coated 2-flute mill?
Replace it when the diamond coating wears off or the ball nose shows visible wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
