M.A. Ford
M.A. Ford 15011810A Tuffcut GP 2 Flute Ball Nose End Mill 3.0mm pneumatic accessory
A 3.0 mm two-flute ball-nose end mill for contoured milling in powered and pneumatic tools
- Two-flute ball nose gives smooth contour cuts
- 0 mm diameter suits fine detail work
- TuffCut GP series built for general-purpose milling
- M.A. Ford quality trusted in professional shops
- New condition ensures full tool life from first use
M.A. Ford Tuffcut GP 3.0 mm end mill
This two-flute ball-nose end mill carries the M.A. Ford Tuffcut GP name and a 3.0 mm cutting diameter. It is built for general-purpose milling in a range of workpiece materials. The tool suits machinists and fabricators who need a reliable ball-profile cutter for contouring and pocketing operations. Buyers needing a larger diameter or a different flute count will need another tool.
Sustained milling performance
The two-flute design provides generous chip space so chips evacuate cleanly during longer cuts. This reduces the risk of chip packing and heat buildup when the tool stays engaged for extended periods. Steady feed rates are easier to maintain because the flute geometry resists clogging under continuous load. Operators who run high-speed roughing passes will see consistent material removal without frequent tool clearing.
Solid carbide construction and shank fit
The cutter is made from solid carbide, giving it the rigidity to hold dimensions under cutting forces. Its shank fits standard collets and end-mill holders used on CNC mills and manual machines. No special adapters or proprietary holders are required for daily use. The tool carries a California Proposition 65 notice for chemicals known to cause cancer and reproductive harm.
Highlights
- Two-flute ball nose gives smooth contour cuts
- 0 mm diameter suits fine detail work
- TuffCut GP series built for general-purpose milling
- M.A. Ford quality trusted in professional shops
- New condition ensures full tool life from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat or vibration does the 3.0 mm ball nose end mill generate during continuous CNC routing?
Heat and vibration depend on spindle speed, feed rate and workpiece material rather than the cutter alone; follow the toolmaker’s recommended parameters for the 3.0 mm diameter to keep both low.
What tool holder or collet size is required to run this 3.0 mm shank end mill?
A 3.0 mm collet or a shrink-fit holder bored for 3.0 mm is needed; the shank diameter is 3.0 mm so the holder must match that size exactly.
Can the 15011810A cutter be used in an older manual milling machine with R8 taper?
Yes, provided you fit an R8-to-3.0 mm collet or chuck; the cutter itself has no machine-specific restriction beyond the 3.0 mm shank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
