M.A. Ford
M.A. Ford 15002360 Tuffcut GP 2 flute ball nose end mill 0.60mm pneumatic accessory
A 0.60 mm two-flute ball-nose end mill for precision contouring in pneumatic tools
- Precision contouring with 2-flute ball nose geometry
- Fine-detail capability at 0.60 mm cutting diameter
- Durable TuffCut GP series construction by M.A. Ford
- New condition ensures full factory performance
- California Prop 65 chemical-hazard disclosure included
M.A. Ford Tuffcut GP ball nose end mill
This M.A. Ford 15002360 Tuffcut GP end mill is a two-flute ball nose cutter designed for precision contouring and finishing in a variety of materials. It suits machinists and engineers who need reliable tool geometry for detailed 3D profiling work. The tool is supplied new and ready for use in compatible milling setups.
0.60 mm cutting diameter for fine detail
The decisive specification is the 0.60 mm cutting diameter, which determines the minimum feature size and radius this tool can produce. Selecting this end mill requires matching that diameter to the specific contour resolution and material removal requirements of the job. No other dimension overrides this choice for the intended application.
Standard shank fits common collets and holders
Installation follows normal practice: secure the shank in a collet or tool holder rated for the shank diameter, then verify runout before cutting. The most common issues arise from excessive runout or insufficient clamping force, which can cause chatter, premature wear, or tool breakage during high-speed operation. California Proposition 65 warnings apply to this product.
Highlights
- Precision contouring with 2-flute ball nose geometry
- Fine-detail capability at 0.60 mm cutting diameter
- Durable TuffCut GP series construction by M.A. Ford
- New condition ensures full factory performance
- California Prop 65 chemical-hazard disclosure included
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 0.60 mm diameter mean for the cuts this end mill can make?
The 0.60 mm ball nose produces a very small radius of cut, suited to fine detail work, tight internal corners and finishing passes in softer materials.
What shank interface does the 15002360 use and what does that limit?
The shank fits standard collets or chucks for 0.60 mm tools, so the maximum run-out and holder rigidity are set by the collet quality, not the cutter.
What physical clearance does the 0.60 mm ball nose need to reach a feature?
The cutter requires at least 0.60 mm of radial clearance and enough axial depth for the flute length to enter the pocket without the shank contacting the wall.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
