M.A. Ford
M.A. Ford 14062500C Tuffcut Gp 4 Flute Ball Nose End Mill 5/8 pneumatic accessory
Four-flute ball nose end mill, 5/8 diameter, cuts contoured profiles in metal and plastic
- 4-flute ball-nose design produces smooth contoured cuts
- TuffCut GP coating extends tool life in tough materials
- 5/8 inch diameter suits medium milling applications
- New condition ensures full cutting performance from first use
- M.A. Ford engineering delivers reliable precision machining
Tuffcut GP 4 Flute Ball Nose End Mill
This M.A. Ford 14062500C is a solid carbide rotary cutter designed for contouring and profiling in a milling machine. The four-flute geometry provides a balance of material removal rate and finish quality for general-purpose machining. It suits machinists and fabricators producing complex three-dimensional surfaces in steel, stainless steel or high-temperature alloys.
Sustained cutting behaviour
The four-flute design distributes chip load evenly across the cutting edges, helping maintain consistent engagement during long passes. Carbide construction resists heat buildup, allowing the tool to hold its edge profile through extended production runs without rapid degradation. Stable performance reduces the frequency of tool changes on batch work.
Setup checks before ordering
Verify that your machine spindle accepts a 5/8 inch shank and that the holder provides sufficient clamping rigidity for carbide tooling. Confirm the workpiece material and your coolant strategy match the capabilities of an uncoated general-purpose geometry. Review the Proposition 65 notice regarding chemical exposure during machining operations.
Highlights
- 4-flute ball-nose design produces smooth contoured cuts
- TuffCut GP coating extends tool life in tough materials
- 5/8 inch diameter suits medium milling applications
- New condition ensures full cutting performance from first use
- M.A. Ford engineering delivers reliable precision machining
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 14062500C end mill generate during continuous milling?
The 14062500C end mill produces heat proportional to feed rate and material hardness; using coolant or air blast keeps temperatures manageable during extended cuts.
What tool holder or collet is required to run the 5/8 inch shank on my machine?
A 5/8 inch ER collet, Weldon flat holder, or shrink-fit chuck matching your spindle taper will secure the 14062500C shank without additional adapters.
Will the 14062500C ball nose profile work with older CNC controllers that lack high-speed look-ahead?
The four-flute geometry cuts smoothly at conventional feed rates, so older controllers without advanced path planning can still produce good surface finishes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
