M.A. Ford
M.A. Ford 14031250T 4 Flute Ball Nose End Mill 5/16
Four-flute ball nose end mill cuts contoured profiles in metal with a 5/16 shank
- 4-flute design enables smooth contour milling
- Ball nose profile creates precise 3D radii
- TuffCut GP series built for general-purpose machining
- 5/16 inch diameter suits medium-detail work
- New condition ensures full factory performance
What the tool is and who uses it
The M.A. Ford 14031250T is a four-flute ball nose end mill built for profiling and finishing operations on milling machines. It suits machinists and fabricators who need a reliable cutter for contour work on a range of materials. The TuffCut GP designation marks it as a general-purpose tool for everyday shop use. It arrives new and ready for the spindle.
Who it suits and who should look elsewhere
This cutter fits operators running standard milling setups who want a single tool for 3D profiling and radius finishing. Buyers who need a different shank diameter, a higher flute count for harder alloys, or a coated variant for extended life in abrasive materials should look at other options in the range. The Prop 65 notice also applies for workplaces tracking chemical exposure.
The specification that decides fit
The 5/16 inch cutting diameter is the primary figure that determines whether this end mill matches the programmed tool path and feature size. Verify that the machine holder accepts this shank and that the flute length covers the required depth of cut before ordering. The 14031250 part number confirms the exact geometry when cross-referencing tool libraries.
Highlights
- 4-flute design enables smooth contour milling
- Ball nose profile creates precise 3D radii
- TuffCut GP series built for general-purpose machining
- 5/16 inch diameter suits medium-detail work
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank standard does the 14031250T end mill use for tool-holder compatibility?
The 5/16 inch diameter implies a standard fractional shank that fits common ER collets and Weldon holders used on milling machines.
What machine clearance and holder type are required to mount this 5/16 ball nose cutter?
A mill spindle with at least 5/16 capacity and a matching collet or end-mill holder; ensure the tool length clears the workpiece and fixtures.
How is the 14031250T installed in a collet, and what step is often missed?
Insert the shank fully so the flute fade-out sits just inside the collet face, then torque the nut to spec; skipping full insertion causes run-out and breakage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
