M.A. Ford
M.A. Ford 14018750C 4 Flute Ball Nose End Mill 3/16
A four-flute ball-nose end mill for contour milling and finishing operations
- Four-flute design improves chip evacuation
- Ball nose geometry enables 3D contour milling
- 3/16 inch diameter suits detailed work
- Tuffcut GP coating extends tool life
- California Proposition 65 chemical warning applies
TuffCut GP 4-flute ball-nose end mill
The M.A. Ford 14018750C is a solid-carbide rotary cutter designed for contouring and finishing operations in general-purpose machining. Its four-flute geometry and ball-nose profile suit CNC operators and tool-room staff who need smooth radius generation on ferrous and non-ferrous workpieces.
3/16 inch cutting diameter
The single specification that determines fit is the 3/16 inch cutting diameter, which must match the programmed tool path and holder capacity. Selecting this diameter ensures the correct step-over and reach for the intended feature size.
General-purpose profiling capacity
The four-flute design provides sufficient chip evacuation and rigidity for light-to-medium profiling passes in steel, aluminium and plastics. Heavy roughing or deep-pocket work with high material-removal rates will exceed the tool's available flute volume and deflection limits.
Highlights
- Four-flute design improves chip evacuation
- Ball nose geometry enables 3D contour milling
- 3/16 inch diameter suits detailed work
- Tuffcut GP coating extends tool life
- California Proposition 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How does the four-flute design affect chip clearance when profiling steel?
Four flutes give a finer finish and higher feed rates in steel, but the tighter chip space requires rigid toolholding and adequate coolant to avoid re-cutting chips.
What shank standard does the 14018750C end mill use?
The cutter is built on a standard 3/16 inch straight shank that fits common ER collets, Weldon flats and shrink-fit holders without adapters.
What holder length is needed to clear the full flute length on a 3/16 inch ball nose?
A standard 3/16 inch collet or end-mill holder with at least 2 inch gauge length provides enough clearance for the flute and neck transition.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
