M.A. Ford
M.A. Ford 14011810A Tuffcut GP 4 Flute Ball Nose End Mill 3.0mm pneumatic accessory
A 3.0 mm, four-flute ball nose end mill from the Tuffcut GP range for general-purpose milling
- 4-flute design enables smoother contour milling
- 0 mm ball nose cuts precise radii
- TuffCut GP series built for general-purpose use
- New condition ensures full cutting performance
- California Prop 65 warning lists chemical hazards
M.A. Ford 3.0 mm ball-nose end mill
The M.A. Ford 14011810A Tuffcut GP is a four-flute ball-nose end mill with a 3.0 mm cutting diameter. It is intended for general-purpose milling in a range of ferrous and non-ferrous materials. Machinists and maintenance technicians use it for contouring, slotting and pocketing operations where a radiused corner is required. The tool is supplied new and ready for immediate use in compatible milling machines.
Four-flute geometry under sustained load
The four-flute design distributes cutting forces across multiple edges, which helps maintain stability during extended cuts. Chip evacuation remains consistent because the flute count balances material removal rate with clearance space. Operators can run longer toolpaths without the vibration spikes that sometimes appear with fewer flutes at full engagement. Heat buildup is managed by the even load sharing, supporting predictable tool life in production runs.
Practical limits of the 3.0 mm shank interface
A 3.0 mm shank fits standard collets and shrink-fit holders but restricts the maximum radial depth of cut to avoid deflection. Tool overhang must be kept short to maintain rigidity, especially when profiling deep cavities. The small diameter also limits the maximum feed per tooth before chip packing becomes an issue. Users needing larger step-overs or deeper reach should select a larger-diameter tool instead.
Highlights
- 4-flute design enables smoother contour milling
- 0 mm ball nose cuts precise radii
- TuffCut GP series built for general-purpose use
- New condition ensures full cutting performance
- California Prop 65 warning lists chemical hazards
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much vibration or heat does the 3.0 mm ball-nose cutter generate during extended CNC runs?
The solid-carbide 4-flute geometry runs cool when fed at recommended chip-loads; keep coolant flowing and the spindle will stay within normal operating temperature.
What holder or collet do I need to run the 14011810A on my mill?
Any ER collet or shrink-fit holder that accepts a 3.0 mm shank will secure the tool; no proprietary adapter is required.
Will this end mill work reliably on older manual knee mills with lower spindle speeds?
Yes — the TuffCut GP carbide substrate handles the lower surface speeds of vintage machines, though you should reduce feed rate proportionally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
