M.A. Ford
M.A. Ford 13650004 End Mill Finisher 1/2
Two-flute end mill finisher for aluminium cutting, half-inch diameter, new condition
- TypeCutting Tools
- Precision finishing for aluminium with two-flute Tuffcut geometry
- California Proposition 65 warning for cancer risk
- California Proposition 65 warning for reproductive harm risk
- Brand-new M.A. Ford cutting tool ready for immediate use
- Manufacturer-direct shipping on orders of $75 or more
M.A. Ford 13650004 End Mill Finisher
The M.A. Ford 13650004 is a Tuffcut Al 2 flute end mill finisher designed for precision milling tasks. It serves machinists and fabricators who require a reliable cutting tool for finishing operations on aluminium and similar non-ferrous materials. The tool is supplied new and ships directly from the manufacturer.
Replaces worn or general-purpose end mills
This finisher replaces dull or less specialised cutters when surface quality and tool life become critical on aluminium workpieces. The upgrade is worth it when a standard end mill leaves chatter marks or wears too quickly during finishing passes. Orders of $75 or more ship free from the manufacturer.
Limited to aluminium and non-ferrous finishing
The 2 flute geometry and Tuffcut Al designation optimise chip evacuation in soft, sticky materials but are not suited for hardened steels or high-temperature alloys. California Proposition 65 warnings apply because the product contains chemicals known to cause cancer and reproductive harm. Users must observe appropriate safety controls.
Highlights
- Precision finishing for aluminium with two-flute Tuffcut geometry
- California Proposition 65 warning for cancer risk
- California Proposition 65 warning for reproductive harm risk
- Brand-new M.A. Ford cutting tool ready for immediate use
- Manufacturer-direct shipping on orders of $75 or more
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
What tool holder or collet size does the 13650004 end mill require for mounting?
The 13650004 has a 1/2 inch shank, so it fits any standard 1/2 inch collet, end-mill holder or shrink-fit chuck rated for that diameter.
How do I install the 13650004 end mill, and what step is often missed?
Clean the shank and collet bore, insert the tool to the recommended depth, then torque the collet nut to the holder manufacturer's spec — skipping the torque check is the common error.
When will the 13650004 end mill need replacement or maintenance?
Replace the cutter when flank wear reaches your shop limit, when edge chipping appears, or when surface finish degrades; no scheduled maintenance is required beyond normal inspection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
