M.A. Ford
M.A. Ford 13547204N5 End Mill Necked 12.0 mm
Two-flute necked end mill with 12.0 mm diameter cuts aluminium efficiently
- TypeCutting Tools
- 2-flute necked design improves chip evacuation in aluminium
- 0 mm cutting diameter matches standard milling operations
- TuffCut AL coating reduces built-up edge on non-ferrous metals
- California Prop 65 notice confirms chemical-safety disclosure
- New condition ensures full factory performance from first use
TuffCut AL End Mill for Aluminium
The M.A. Ford 13547204N5 is a two-flute solid carbide end mill with a necked shank and 12.0 mm cutting diameter. It is intended for machinists and CNC operators who need efficient material removal in aluminium and other non-ferrous alloys. The TuffCut AL geometry reduces built-up edge and promotes chip evacuation at high feed rates.
Practical limits of the cutting geometry
Two flutes provide large gullet space for the high chip volumes typical of aluminium, but they limit feed per revolution compared to multi-flute roughers. The necked profile extends reach for deep pockets or vertical walls, yet the reduced core diameter means deflection increases with projection length. Users must balance depth of cut and tool stick-out to maintain dimensional accuracy.
Solid carbide construction and shank interface
The solid carbide body delivers the rigidity and wear resistance required for abrasive aluminium alloys, while the cylindrical shank fits standard ER collets or hydraulic holders. No flats or whistle-notch features are present, so pull-out resistance depends entirely on holder clamping force. California Proposition 65 warnings apply because the carbide grade contains cobalt and nickel compounds.
Highlights
- 2-flute necked design improves chip evacuation in aluminium
- 0 mm cutting diameter matches standard milling operations
- TuffCut AL coating reduces built-up edge on non-ferrous metals
- California Prop 65 notice confirms chemical-safety disclosure
- New condition ensures full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
Should I choose the 12.0 mm necked version or a different diameter?
The 12.0 mm necked end mill suits slots and pockets needing that exact width; pick a smaller diameter only if your tool path requires a tighter radius.
How does the 2-flute Tuffcut Al geometry perform in aluminium?
Two polished flutes with a high helix evacuate large chips fast, reducing built-up edge and letting you run higher feed rates in non-ferrous alloys.
What does the necked shank allow on a standard milling holder?
The reduced neck clears fixture clamps and deep walls, so the 12.0 mm cutter reaches farther without shank interference.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
