M.A. Ford
M.A. Ford 13519600N3 5.0 mm End Mill
5.0 mm two-flute necked end mill for aluminium machining, California Proposition 65 listed
- TypeCutting Tools
- 0 mm necked design for deep-reach milling
- two-flute geometry clears chips in aluminium
- TuffCut AL coating extends tool life
- new condition ensures full cutting performance
- California Proposition 65 warning applies
M.A. Ford 5.0 mm End Mill
This M.A. Ford 13519600N3 Tuffcut Al end mill is a two-flute necked cutting tool designed for aluminium machining. The 5.0 mm diameter suits precision milling operations where chip evacuation and reach are priorities. It serves CNC operators and job-shop technicians who need a dedicated aluminium cutter.
Necked two-flute carbide construction
The necked shank provides extended reach into deep cavities without reducing the cutting diameter. Two flutes create large gullet space so aluminium chips exit cleanly, reducing re-cutting and built-up edge. Carbide substrate resists wear during high-speed passes, keeping the tool sharp across repeated jobs.
Aluminium-specific geometry limits versatility
The high-helix, polished-flute design is optimised for non-ferrous alloys and will not perform well in steel, titanium or hardened materials. Users must match spindle speed and feed rates to aluminium parameters; running outside that envelope accelerates wear or causes chatter. California Proposition 65 notices apply to this product.
Highlights
- 0 mm necked design for deep-reach milling
- two-flute geometry clears chips in aluminium
- TuffCut AL coating extends tool life
- new condition ensures full cutting performance
- California Proposition 65 warning applies
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
What shank diameter fits the 5.0 mm TuffCut AL necked end mill?
The cutter has a 5.0 mm cutting diameter; the shank matches that size so a standard 5.0 mm collet or holder is required.
What clearance does the necked section need in the workpiece?
The relieved neck allows deeper reach without the shank contacting the wall, so the cavity must be wide enough for the 5.0 mm body plus chip space.
How is the 2-flute aluminium end mill secured in the holder?
Clamp the cylindrical shank in a precision collet or hydraulic holder, tighten to the maker's torque spec, and verify run-out before cutting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
