M.A. Ford
M.A. Ford 13511800N5 3.0 mm End Mill
3.0 mm aluminium end mill with necked design and two flutes for chip clearance
- TypeCutting Tools
- TuffCut AL coating optimises aluminium machining
- Two-flute geometry clears chips efficiently in soft materials
- Necked design reaches deep cavities without interference
- 0 mm diameter suits fine-detail milling tasks
- California Proposition 65 warning informs safe-handling practices
Precision End Mill For Aluminium
The M.A. Ford 13511800N5 is a 3.0 mm diameter, two-flute TuffCut Al end mill with a necked design. It is intended for machinists and fabricators who need clean chip evacuation in aluminium and other non-ferrous materials.
Check Shank And Holder Compatibility
Verify that your tool holder or collet accepts the shank diameter of this specific cutter before ordering. Confirm that your machine spindle provides sufficient rigidity and run-out control for a small-diameter, necked tool to prevent deflection or breakage during deep pocketing.
Necked Geometry Improves Reach
The necked profile allows the flutes to reach deeper into cavities without the shank contacting the workpiece walls. This design change reduces the risk of tool collision and improves surface finish on vertical sidewalls during profiling passes.
Highlights
- TuffCut AL coating optimises aluminium machining
- Two-flute geometry clears chips efficiently in soft materials
- Necked design reaches deep cavities without interference
- 0 mm diameter suits fine-detail milling tasks
- California Proposition 65 warning informs safe-handling practices
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
What comes with the 13511800N5 end mill and what must be purchased separately?
The box contains the single Tuffcut Al 2-flute necked end mill. A tool holder, collet, coolant supply and workpiece fixturing are not included and must be sourced separately.
How do I choose between the listed versions of the 3.0 mm Tuffcut Al end mill?
Only the 13511800N5 variant with a 3.0 mm diameter is offered here; there are no alternative diameters, flute counts or coatings to select from.
What does the 3.0 mm diameter mean when the cutter is in a CNC spindle?
It sets the maximum width of cut per pass and determines the step-over distance for aluminium profiling; the necked design allows deeper pockets without shank interference.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
