We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount chassis with 48 front RJ45 ports and four SFP+ cages

Luxul

Luxul SW-615-48P-F 48-port PoE+ network switch with 4×10G SFP+ uplinks

SKU CH-Q86N-8DBXR MPN SW-615-48P-F

Managed 48-port Gigabit PoE+ switch with 740 W budget and four 10 Gbps SFP+ uplinks

  • Switch TypeManaged
  • Network MediaGigabit Ethernet
  • Uplink Ports4
  • Uplink InterfaceSFP+
  • Uplink Speed10 Gbps
  • Primary Port Count48
  • 48 PoE+ ports deliver power and data to access points and cameras
  • 740 W PoE budget supports dense endpoint deployments
  • Four 10 Gbps SFP+ uplinks aggregate to 40 Gbps backbone capacity
  • Layer 3 management enables VLAN routing and 802.1Q trunking across 4094 VIDs
  • Jumbo frames up to 10240 bytes improve throughput for storage and backup traffic

48-port PoE+ switch with 10G uplinks

The Luxul SW-615-48P-F is a Layer 3 managed switch offering 48 Gigabit RJ45 ports, each supporting PoE+. Four front-facing 10 Gbps SFP+ uplinks provide high-speed aggregation up to 40 Gbps. It delivers a 740 Watt PoE budget for powering access points, cameras and VoIP phones.

Suited for PoE-heavy sites, not non-PoE installs

This switch fits networks that need to power 48 devices over a single cable run. The 740 W budget covers most mid-density deployments. Sites that do not require PoE, or that need more than 48 powered ports, should consider a different configuration.

740 W PoE budget across 48 ports

The total PoE+ power budget of 740 Watt is the figure that determines how many Class 4 devices can run simultaneously. Check the per-device draw against this limit before specifying the switch.

Highlights

  • 48 PoE+ ports deliver power and data to access points and cameras
  • 740 W PoE budget supports dense endpoint deployments
  • Four 10 Gbps SFP+ uplinks aggregate to 40 Gbps backbone capacity
  • Layer 3 management enables VLAN routing and 802.1Q trunking across 4094 VIDs
  • Jumbo frames up to 10240 bytes improve throughput for storage and backup traffic

Specifications

BrandLuxul
SeriesSW-615
ModelSW-615-48P-F
Part NumberSW-615-48P-F
Switch TypeManaged
Network MediaGigabit Ethernet
Uplink Ports4
Uplink InterfaceSFP+
Uplink Speed10 Gbps
Primary Port Count48
Primary Ports48
Primary Port Speed1 Gbps
Primary Port TypeRJ45
VLAN Support802.1Q, max 4094 VIDs & VLAN trunking
Jumbo FramesYes, up to 10240 Bytes
PoEYes
PoE Ports48
PoE Power Budget740 Watt
PowerAC Adapter, 100 VAC
Max Power Consumption885 Watt
Dimensions14.75" W x 17.4" D x 1.75" H
Weight6.2 lbs.
Temperature0C to 40C operating
Shipping weight6.80 kg
Package size569 × 470 × 122 mm

Questions about this item

How do I install the SFP+ uplink modules so the 10 Gbps links come up on the SW-615-48P-F?

Insert each SFP+ transceiver fully until it clicks, then connect matching single-mode or multi-mode fibre; the four front-facing SFP+ slots accept 10GBase-X modules and can be aggregated to 40 Gbps.

What maintenance will the 740 Watt PoE+ budget require over time on this Luxul switch?

Monitor the 740 W PoE budget against attached devices; if total draw approaches the limit, add a second power source or reduce connected endpoints to avoid port shutdowns.

Which limit appears first when all 48 PoE+ ports run continuously on the SW-615-48P-F?

The 740 W PoE power budget is reached before the 885 W max consumption, so sustained full-port PoE+ loads will hit the PoE budget ceiling first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.