We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount network switch with 48 front-facing RJ45 ports and four SFP slots

Luxul

Luxul SW-515-48P-F network switch 48 PoE+ 4 SFP 740W

SKU CH-06G3-54E3R MPN SW-515-48P-F

Managed switch with 48 PoE+ ports and 4 SFP uplinks, 740 W budget, Layer 2/3 features

  • Switch TypeManaged
  • FormatRack-Mountable
  • Network MediaGigabit Ethernet
  • Uplink Ports4
  • Uplink InterfaceSFP
  • Primary Port Count48
  • 48 PoE+ ports power cameras and APs with 30 W each
  • 740 W total budget runs all 48 ports at full power
  • Layer 2 and Layer 3 switching handles multicast AV traffic
  • 4 SFP uplinks aggregate to 4 Gb trunk links
  • 32 K MAC table scales across large campus networks

48-port managed PoE+ switch

The Luxul SW-515-48P-F is a rack-mountable managed switch designed for networks that need power and data over a single cable. It provides 48 Gigabit RJ45 ports with PoE+ capability and four SFP uplink ports for fibre uplinks. The unit supports Layer 2 and Layer 3 features for advanced traffic handling.

740 W PoE budget and port limits

The switch delivers up to 30 W per PoE+ port for 802.11af/at-compliant devices such as access points or cameras. A total power budget of 740 W across all 48 ports means full 30 W cannot be sustained on every port simultaneously. Non-PoE devices receive data connectivity only on the same ports.

SFP uplink aggregation and frame capacity

Four 1 Gbps SFP ports allow fibre uplinks and can be aggregated for up to 4 Gbps of uplink throughput. Jumbo frames up to 10240 bytes are supported for efficient large-payload transfers. The MAC address table holds up to 32K entries for scalable switching.

Highlights

  • 48 PoE+ ports power cameras and APs with 30 W each
  • 740 W total budget runs all 48 ports at full power
  • Layer 2 and Layer 3 switching handles multicast AV traffic
  • 4 SFP uplinks aggregate to 4 Gb trunk links
  • 32 K MAC table scales across large campus networks

Specifications

BrandLuxul
SeriesSW-515
ModelSW-515-48P-F
Part NumberSW-515-48P-F
Switch TypeManaged
FormatRack-Mountable
Network MediaGigabit Ethernet
Uplink Ports4
Uplink InterfaceSFP
Primary Port Count48
Primary Ports48
Primary Port Speed1 Gbps
Primary Port TypeRJ45
MAC Address TableUp to 32K
VLAN Support802.1d, 802.1p, 802.1s
Jumbo FramesYes, up to 10240 Bytes
PoEYes
LayerLayer 2, Layer 3
PoE Ports48
PoE Power Budget740 Watt
PowerPower Supply, AC 100-240V, 50-60Hz
Max Power Consumption885 Watt
Dimensions14.75" W x 17.4" D x 1.75" H
Weight12.1 lbs.
Temperature0C to 50C operating
Shipping weight6.80 kg
Package size574 × 470 × 107 mm

Questions about this item

Will the 48 PoE+ ports and 740 W budget power my existing 802.11af/at access points without extra injectors?

Yes, every RJ-45 port supplies up to 30 W to 802.11af/at devices, and the 740 W pool covers all 48 ports simultaneously.

How can I verify the four SFP uplinks are passing traffic at line rate after installation?

Check the management interface for link status, SFP module recognition, and port counters showing 1 Gbps throughput on each uplink.

Does the box include SFP transceivers for the four uplink slots or must I buy them separately?

Transceivers are not included; the four SFP slots accept standard 1 Gbps modules that you source separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.