We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black H1 LED bulbs with clear lenses and built-in turbo fans

LUOM

LUOM AKAS T1-H1-F H1 LED Headlight Bulbs 70W 7200LM 6000K Canbus

SKU CH-BTH4-DS0CV

H1 LED bulbs deliver 7200 lumens per set at 6000K with built-in Canbus and IP67-rated turbo cooling

  • TypeHeadlights
  • Selling UnitSet of 2
  • Color/Finish6000K (Pure White)
  • Beam Angle Range61 to 120 deg
  • Beam TypeHigh Beam
  • SizeH1

Size H1

  • 70 W per pair delivers 7200 lumens for far-reaching visibility
  • 6000 K cool white light matches daylight colour for reduced eye strain
  • IP67 waterproof rating and 12 000 RPM turbo fan keep output stable in harsh weather
  • Canbus-ready design works with 9–32 V systems without error codes
  • Convex LED chips rated for 50 000 hours of continuous use

Ideal H1 Upgrade

These H1 LED bulbs replace factory halogen units in high-beam, low-beam or fog-light housings. Each bulb draws 35 watts and produces 3600 lumens at a 6000 kelvin cool-white colour temperature. The set delivers a combined 7200 lumens for drivers who need noticeably brighter forward lighting without changing the vehicle’s electrical architecture.

Thermal & Electrical Behaviour

A 12,000 RPM turbo fan and heat-sink design keep the emitters running at full output for a rated 50,000 hours. Operating voltage spans 9 to 32 volts DC with a 3.2 ampere draw, while the built-in Canbus decoder prevents dashboard errors on most 12-24 volt systems. The convex LED chips maintain a consistent beam pattern across the 61 to 120 degree spread.

Included Canbus Decoder

The supplied decoder module resolves hyper-flash and bulb-out warnings that often appear when LED retrofits draw less current than the original halogens. No extra resistors or wiring harnesses are required for typical plug-and-play installation, though some vehicles may still need professional fitting to access the headlamp assemblies.

Highlights

  • 70 W per pair delivers 7200 lumens for far-reaching visibility
  • 6000 K cool white light matches daylight colour for reduced eye strain
  • IP67 waterproof rating and 12 000 RPM turbo fan keep output stable in harsh weather
  • Canbus-ready design works with 9–32 V systems without error codes
  • Convex LED chips rated for 50 000 hours of continuous use

Specifications

BrandNOVSIGHT
ModelAKAS T1-H1-F
TypeHeadlights
Selling UnitSet of 2
Color/Finish6000K (Pure White)
Beam Angle Range61 to 120 deg
Beam TypeHigh Beam
SizeH1
Current ControlYes
Current Draw2 watts
Dual PolarityYes
Forward Voltage9-14.5V
High PowerYes
Housing ColorBlack
Lens ColorClear
Light Bulb IncludedYes
Light Color Temperature6000K (Crystal White)
Light SourceLED
Lumen Output3200
Operating Voltage12-24V
Product FitDirect Fit Performance
V-Star Rating5
Wiring Harness IncludedYes
CAN bus CompatibilityYes
Certification/StandardsDOT
MaterialABS
QualityPerformance
ShapeRectangular

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the H1 LED bulbs and what is the step most people miss?

The bulbs are a direct plug-and-play replacement for OEM H1 halogen units; the step most people miss is verifying that the vehicle's CANbus system recognises the 3.2 A current draw without triggering a dashboard error.

What maintenance or replacement will the H1 LED set need later?

The integrated 12,000 RPM turbo fan and convex LED chips are rated for 50,000 hours; no scheduled maintenance is required, but the entire bulb assembly must be replaced once light output degrades after that lifespan.

What limit appears first during sustained high-beam use?

Thermal protection kicks in first — the heat-sink design keeps the housing 30 % cooler than standard, yet continuous operation at 35 W per bulb will eventually hit the fan's cooling capacity before any electrical limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.