LSI Logic Corp
LSI MegaRAID SAS 9361-4i 4-Port 12Gb/s SAS SATA PCIe 3.0 Low Profile RAID Controller
Connects up to 128 SAS or SATA drives through four 12Gb/s ports on a low-profile PCIe 3.0 card with RAID 0, 1, 5, 6, 10, 50 and 60 support
- Connect up to 128 drives with four internal 12Gb/s SAS and SATA ports
- Low-profile form factor with side-mounted connectors fits rack-mounted servers
- PCIe 3.0 connectivity supports critical high-bandwidth applications
- RAID levels 0, 1, 5, 6, 10, 50 and 60 balance protection and performance
- Optional CacheVault flash cache protection adds extra data safeguarding
4-Port 12Gb/s SAS SATA RAID Controller
The LSI MegaRAID SAS 9361-4i connects up to 128 drives through four internal 12Gb/s ports. It uses a PCIe 3.0 interface and a low-profile bracket for rack-mounted servers. RAID levels 0, 1, 5, 6, 10, 50 and 60 are supported. Optional CacheVault flash cache protection is available.
Suits servers needing internal SAS or SATA arrays
This card fits builders who want hardware RAID for up to 128 SATA or SAS drives in a low-profile slot. It serves workloads that demand RAID 5, 6, 10, 50 or 60 protection. Buyers who need more than four internal ports or who require external drive connections should look at something else.
Four internal 12Gb/s ports with PCIe 3.0
The controller provides four native 12Gb/s SAS and SATA ports on a PCIe 3.0 x8 link. This port count and link width decide whether the card matches your backplane and slot layout. Verify both before purchase.
Highlights
- Connect up to 128 drives with four internal 12Gb/s SAS and SATA ports
- Low-profile form factor with side-mounted connectors fits rack-mounted servers
- PCIe 3.0 connectivity supports critical high-bandwidth applications
- RAID levels 0, 1, 5, 6, 10, 50 and 60 balance protection and performance
- Optional CacheVault flash cache protection adds extra data safeguarding
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 4-port or 8-port version of the 9361?
This model has four internal ports, each running at 12Gb/s SAS or SATA, so the choice depends on how many drives you need to connect directly.
What does the 12Gb/s rating deliver inside a server?
Each port provides up to 12Gb/s bandwidth to attached SAS or SATA drives, raising throughput for critical applications over 6Gb/s controllers.
Does PCIe 3.0 limit the 12Gb/s ports?
The card uses a PCIe 3.0 host link; total throughput across the four 12Gb/s ports cannot exceed the lane bandwidth of that interface.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
