LPScreen
LPScreen NV173FHM-NY2 V8.1 17.3" FHD 144Hz laptop screen
A 17.3 inch 1920x1080 laptop replacement screen with a 144Hz refresh rate, 300 cd/m² brightness and 100% sRGB colour coverage
- Compatible ModelsNV173FHM-NY2V8.1
- Screen Size17.3”
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp motion clarity with 144Hz refresh rate
- Crisp Full HD detail at 1920x1080 resolution
- Vibrant colour accuracy covering 100% sRGB gamut
- Wide viewing angles up to 85 degrees each side
- Simple installation using standard 40-pin connector
17.3" FHD 144Hz replacement panel
This 17.3 inch Full HD display runs at 144 Hz and targets laptop owners who need a direct screen swap for the NV173FHM-NY2 V8.1 part. It arrives new and without a touch layer, matching the original non-touch specification.
Capacity and headroom
The panel delivers 1920 by 1080 resolution at 144 Hz with 300 cd/m² brightness and a 1200:1 contrast ratio. Colour coverage reaches 100 % sRGB across 16.7 million colours, while 85-degree viewing angles hold image quality off-centre. The 40-pin connector is the only interface provided.
Upgrade path
It replaces a cracked or dim NV173FHM-NY2 V8.1 screen with an identical-specification unit. The jump is worth it when the original panel has failed or lost brightness, but it does not add touch input, higher resolution or a faster refresh rate than the factory panel.
Highlights
- Sharp motion clarity with 144Hz refresh rate
- Crisp Full HD detail at 1920x1080 resolution
- Vibrant colour accuracy covering 100% sRGB gamut
- Wide viewing angles up to 85 degrees each side
- Simple installation using standard 40-pin connector
Specifications
| Model | NV173FHM-NY2V8.1 |
|---|---|
| Part Number | NV173FHM-NY2V8.1 |
| Compatible Models | NV173FHM-NY2V8.1 |
| Screen Size | 17.3” |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 40-pin connector on this NV173FHM-NY2 V8.1 panel fit the cable already in my 17.3" laptop?
The panel uses a 40-pin connector; match that pin count and the 1920x1080 144Hz signal with your laptop's existing cable before installing.
How can I verify the 144Hz refresh rate and 100% sRGB colour are active after I swap the screen?
Open Windows display settings or your GPU control panel, set the refresh rate to 144Hz, then run a colour-gamut test to confirm 100% sRGB coverage.
Does the box include mounting brackets or adhesive strips, or must I reuse the ones from my old screen?
Only the bare 17.3" NV173FHM-NY2 V8.1 panel is supplied; brackets, bezel clips and any adhesive must be transferred from the original display.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



