LPScreen
LPScreen NV133WUM-N62 V3.1 13.3" WUXGA 1920x1200 60Hz laptop screen
A 13.3 inch WUXGA 1920x1200 60Hz replacement laptop screen with 400 cd/m² brightness, 1200:1 contrast, 100% sRGB colour and a 30-pin connector
- Compatible ModelsNV133WUM-N62V3.1
- Screen Size13.3"
- Screen ResolutionWUXGA 1920x1200
- Sharp detail with WUXGA 1920x1200 resolution
- Vivid colours covering 100% sRGB gamut
- Bright 400 cd/m² output for clear viewing
- Wide 89-degree angles maintain image quality
- Ready to fit with 30-pin connector
Replacement screen specification
This LPScreen panel is a direct replacement for laptops that originally used the NV133WUM-N62 V3.1 part. It matches the factory 13.3 inch WUXGA resolution, 60 Hz refresh rate and 30-pin connector exactly. The matte, non-touch surface restores the original display behaviour without modification.
Fitment guidance
The panel suits owners whose broken screen carries the identical NV133WUM-N62 V3.1 part number and 30-pin interface. Buyers with a different part number, a touch-enabled assembly or a dissimilar connector should verify compatibility before ordering.
Critical compatibility check
The 30-pin connector and V3.1 revision are the single details that decide whether this screen will work in a given laptop. Match both values against the original panel label before purchase.
Highlights
- Sharp detail with WUXGA 1920x1200 resolution
- Vivid colours covering 100% sRGB gamut
- Bright 400 cd/m² output for clear viewing
- Wide 89-degree angles maintain image quality
- Ready to fit with 30-pin connector
Specifications
| Model | NV133WUM-N62V3.1 |
|---|---|
| Part Number | NV133WUM-N62V3.1 |
| Compatible Models | NV133WUM-N62V3.1 |
| Screen Size | 13.3" |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
Does the 30-pin connector support the 1920x1200 resolution at 60Hz?
Yes, the 30-pin connector carries the full WUXGA 1920x1200 signal at 60Hz without bandwidth limitation.
What bezel and screw-hole pattern does the 13.3-inch panel require?
The panel matches the NV133WUM-N62 V3.1 mounting holes and bezel clips; verify your original part number before fitting.
How do I seat the 30-pin cable correctly to avoid a blank screen?
Insert the cable squarely until the latch clicks, then apply the retention tape; a partial seat causes no image or flicker.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



