LPScreen
LPScreen NE173QUM-NY1 17.3" UHD 4K 3840x2160 laptop screen
A 17.3 inch UHD 4K 3840x2160 non-touch replacement laptop screen with 1200:1 contrast and 85-degree viewing angles
- Compatible ModelsNE173QUM-NY1
- Screen Size17.3”
- Screen ResolutionUHD 4K 3840x2160
- Sharp 4K detail from 3840×2160 resolution
- Wide 17.3″ workspace for multitasking
- Consistent colour at 85° viewing angles
- Deep blacks from 1200:1 contrast ratio
- Non-touch surface reduces glare and fingerprints
Exact Replacement Screen
The LPScreen NE173QUM-NY1 is a brand-new 17.3 inch UHD 4K panel built to match the original part number NE173QUM-NY1. It delivers a native resolution of 3840x2160 without a touch layer, making it a direct swap for a damaged or faulty display in the specific laptop model it was designed for.
Repair Shops and DIY Upgraders
Technicians and owners who need an exact panel match for the NE173QUM-NY1 will find this screen fits the mounting points and connector without modification. Buyers whose laptop uses a different part number, a touch-enabled assembly, or a lower resolution panel should look elsewhere because this unit will not align or function correctly in those chassis.
3840x2160 Native Resolution
The single specification that decides compatibility is the native UHD 4K resolution of 3840x2160 paired with the NE173QUM-NY1 part number; the laptop’s video cable and firmware must support this exact pixel count and timing. The panel also provides a 1200:1 contrast ratio and 85 degree viewing angles in all four directions for consistent colour and brightness.
Highlights
- Sharp 4K detail from 3840×2160 resolution
- Wide 17.3″ workspace for multitasking
- Consistent colour at 85° viewing angles
- Deep blacks from 1200:1 contrast ratio
- Non-touch surface reduces glare and fingerprints
Specifications
| Model | NE173QUM-NY1 |
|---|---|
| Part Number | NE173QUM-NY1 |
| Compatible Models | NE173QUM-NY1 |
| Screen Size | 17.3” |
| Screen Resolution | UHD 4K 3840x2160 |
Questions about this item
How do I install the NE173QUM-NY1 17.3" UHD 4K panel and which step is most often done wrong?
Disconnect the battery, remove the bezel, unplug the 40-pin eDP cable from the old panel, fit the new NE173QUM-NY1, reconnect the cable fully, then refit the bezel; the step most often missed is seating the eDP connector completely, which causes a blank or flickering 3840x2160 image
What maintenance or replacement will the NE173QUM-NY1 need later?
The LED backlight is not user-serviceable; if brightness drops unevenly or the 1200:1 contrast degrades after years of use, the entire NE173QUM-NY1 panel must be replaced
What limit appears first on the NE173QUM-NY1 during sustained use?
The 85/85/85/85 viewing-angle spec means colour shift becomes visible at off-centre positions before any thermal throttling affects the 3840x2160 output
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



