LPScreen
LPScreen NE160QDM-NZ2 laptop screen 16" WQXGA 2560x1600 240Hz 40 pin
16-inch WQXGA 2560×1600 laptop replacement screen with 240 Hz refresh rate, 500 cd/m² brightness, 1200:1 contrast, 1.06 billion colours covering 100% DCI-P3, 40-pin connector and no touch layer
- Compatible ModelsNE160QDM-NZ2
- Screen Size16”
- Screen ResolutionWQXGA 2560x1600
- Sharp 2560×1600 WQXGA detail on a 16" panel
- Fluid 240 Hz refresh for smooth motion
- 06 billion colours covering 100% DCI-P3
- 500 cd/m² brightness with 1200:1 contrast
- Wide 80° viewing angles and 40-pin connector
16-inch WQXGA laptop display
This 16-inch replacement panel delivers WQXGA 2560x1600 resolution at a 240 Hz refresh rate. It uses a 40-pin connector and is built without a touch layer. The screen targets gamers and creators who need high pixel density and fast motion clarity.
500 cd/m² brightness and 1200:1 contrast
Typical brightness reaches 500 cd/m² with a 1200:1 contrast ratio for deep blacks. Viewing angles measure 80 degrees in all four directions for consistent colour. Power draw and acoustic output follow the laptop’s own thermal design.
1.06 billion colours covering 100% DCI-P3
The panel reproduces 1.06 billion colours across 100% DCI-P3 for accurate creative work. No extra drivers, calibration tools or mounting hardware are bundled. Buyers who need touch input or a different connector pin-count should verify compatibility before ordering.
Highlights
- Sharp 2560×1600 WQXGA detail on a 16" panel
- Fluid 240 Hz refresh for smooth motion
- 06 billion colours covering 100% DCI-P3
- 500 cd/m² brightness with 1200:1 contrast
- Wide 80° viewing angles and 40-pin connector
Specifications
| Model | NE160QDM-NZ2 |
|---|---|
| Part Number | NE160QDM-NZ2 |
| Compatible Models | NE160QDM-NZ2 |
| Screen Size | 16” |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
How do I route the 40-pin connector through the hinge when installing this 16-inch WQXGA panel?
Disconnect the battery, remove the bezel, unplug the old cable, feed the 40-pin ribbon through the hinge channel without twisting, seat it fully in the socket, then test at 240 Hz before reassembling.
Will the 500 cd/m² backlight or the 1200:1 contrast ratio degrade first after years of daily use?
LED backlight output typically drops before the 1200:1 contrast ratio shifts, so expect the 500 cd/m² brightness to fade gradually over extended use.
At what point does the 240 Hz refresh rate become unstable during long gaming sessions?
Sustained 240 Hz operation stays stable until panel temperature triggers thermal throttling; adequate chassis airflow keeps the 16-inch display within spec.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



