LPScreen
LPScreen N160JME-GE1 REV.C1 16" WUXGA 1920x1200 165Hz laptop screen
16 inch WUXGA 1920x1200 165Hz laptop replacement screen with 40 pin connector, 100% sRGB colour and 250 cd/m² brightness
- Compatible ModelsN160JME-GE1REV.C1
- Screen Size16”
- Screen ResolutionWUXGA 1920x1200
- WUXGA 1920x1200 resolution delivers sharp detail on a 16 inch panel
- 165Hz refresh rate provides smooth motion for gaming and fast content
- 100% sRGB with 16.7M colours ensures accurate colour reproduction
- 250 cd/m² brightness and 800:1 contrast ratio offer clear visibility in varied lighting
- 40-pin connector and 89-degree viewing angles support straightforward installation and wide visibility
Screen specification and fit
This 16 inch WUXGA panel runs at 1920x1200 with a 165 Hz refresh rate. It uses a 40 pin connector and delivers 250 cd/m² brightness with an 800:1 contrast ratio. The matte finish covers 100 percent sRGB colour volume for accurate tones.
Buyers who need a touch layer
Shoppers whose laptop requires a touch-enabled display or a connector other than 40 pins should look elsewhere. The panel is also fixed at 165 Hz, so systems locked to a lower refresh rate will not benefit.
The 40 pin connector decides compatibility
Match the 40 pin interface on your current screen before ordering. If the original panel uses a different pin layout or includes a touch digitiser, this unit will not fit.
Highlights
- WUXGA 1920x1200 resolution delivers sharp detail on a 16 inch panel
- 165Hz refresh rate provides smooth motion for gaming and fast content
- 100% sRGB with 16.7M colours ensures accurate colour reproduction
- 250 cd/m² brightness and 800:1 contrast ratio offer clear visibility in varied lighting
- 40-pin connector and 89-degree viewing angles support straightforward installation and wide visibility
Specifications
| Model | N160JME-GE1REV.C1 |
|---|---|
| Part Number | N160JME-GE1REV.C1 |
| Compatible Models | N160JME-GE1REV.C1 |
| Screen Size | 16” |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
How do I install the 40‑pin connector without bending the ribbon cable?
Align the 40‑pin connector squarely with the motherboard socket, press straight down until it clicks, then fold the ribbon flat — do not twist it — before securing the bezel screws.
Will the backlight need replacement after a few years of daily use?
The LED backlight is rated for typical notebook lifespan; brightness may gradually drop from the original 250 cd/m² after several years, at which point the whole panel is usually swapped.
At what point does the 165 Hz refresh rate become unstable during long gaming sessions?
Sustained load can push panel temperature past the point where the 165 Hz timing remains stable, causing occasional frame drops or flicker until the display cools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



