LPScreen
LPScreen N140GLE-GL1 14" WQXGA 2560x1600 120Hz laptop screen
A 14 inch WQXGA 2560x1600 laptop replacement screen with 120Hz refresh rate, 300 cd/m² brightness and 100% sRGB colour
- Compatible ModelsN140GLE-GL1
- Screen Size14"
- Screen ResolutionWQXGA 2560x1600
- Sharp 2560x1600 WQXGA detail on a 14-inch panel
- Smooth 120 Hz refresh for fluid motion
- Accurate 100 % sRGB colour with 16.7 M shades
- Bright 300 cd/m² output and 1500:1 contrast
- Wide 89° viewing angles from every direction
14-inch WQXGA replacement panel
The LPScreen N140GLE-GL1 is a 14-inch laptop replacement screen with a WQXGA 2560x1600 resolution and a 120Hz refresh rate. It uses a 40-pin connector and delivers 300 cd/m² brightness with a 1500:1 contrast ratio. The non-touch display covers 100% sRGB with 16.7M colours.
Suitable for exact model matches only
This panel fits builders repairing a laptop that originally shipped with the N140GLE-GL1 part number. It is not for buyers who need touch input, a different connector layout, or a screen size other than 14 inches. Compatibility must be verified before installation.
40-pin connector decides fit
The single specification that determines whether this is the correct part is the 40-pin interface. If the original screen uses a different pin count or pin arrangement, this panel will not connect. Match the part number and connector exactly before ordering.
Highlights
- Sharp 2560x1600 WQXGA detail on a 14-inch panel
- Smooth 120 Hz refresh for fluid motion
- Accurate 100 % sRGB colour with 16.7 M shades
- Bright 300 cd/m² output and 1500:1 contrast
- Wide 89° viewing angles from every direction
Specifications
| Model | N140GLE-GL1 |
|---|---|
| Part Number | N140GLE-GL1 |
| Compatible Models | N140GLE-GL1 |
| Screen Size | 14" |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
Will this 40-pin WQXGA panel work with my laptop's existing eDP cable and 120 Hz timing?
The panel uses a 40-pin connector and is specified for 2560 x 1600 at 120 Hz; match those to your cable and firmware.
Can I keep my current 60 Hz 1080p display cable when swapping to this 120 Hz 2560 x 1600 screen?
A 60 Hz 1080p cable may lack the lane count or signal quality for 120 Hz WQXGA; verify pin-out and bandwidth first.
How do I confirm the panel is delivering 100 % sRGB and 120 Hz after installation?
Run an OS colour-profile check for 100 % sRGB coverage and set the refresh rate to 120 Hz in display settings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



