LPScreen
LPScreen N133JCG-GT1 REV.C5 13.3" WUXGA 1920x1200 60Hz laptop screen
A 13.3 inch WUXGA 1920x1200 60Hz laptop replacement screen with 400 cd/m² brightness, 1500:1 contrast, 100% sRGB colour and a 30-pin connector
- Compatible ModelsN133JCG-GT1REV.C5
- Screen Size13.3"
- Screen ResolutionWUXGA 1920x1200
- WUXGA 1920x1200 resolution delivers sharp detail
- 100% sRGB colour gamut ensures accurate tones
- 400 cd/m² brightness suits bright environments
- 1500:1 contrast ratio adds depth to images
- 30-pin connector matches N133JCG-GT1 REV.C5 specification
13.3" WUXGA 60 Hz replacement screen
This 13.3 inch panel delivers WUXGA 1920x1200 resolution at a 60 Hz refresh rate. It is built as a direct replacement for the N133JCG-GT1 REV.C5 model and uses a 30 pin connector. The matte finish shows 16.7 million colours with 100 percent sRGB coverage.
For non-touch WUXGA repairs only
The screen suits technicians or owners restoring a laptop that originally shipped with this exact non-touch panel. It will not fit machines that require a touch-enabled digitiser, a different connector layout, or a higher refresh-rate specification.
30 pin connector decides compatibility
Match the 30 pin interface on your existing cable before ordering; a different pin count will prevent installation. The part number N133JCG-GT1REV.C5 must correspond to the label on the original display.
Highlights
- WUXGA 1920x1200 resolution delivers sharp detail
- 100% sRGB colour gamut ensures accurate tones
- 400 cd/m² brightness suits bright environments
- 1500:1 contrast ratio adds depth to images
- 30-pin connector matches N133JCG-GT1 REV.C5 specification
Specifications
| Model | N133JCG-GT1REV.C5 |
|---|---|
| Part Number | N133JCG-GT1REV.C5 |
| Compatible Models | N133JCG-GT1REV.C5 |
| Screen Size | 13.3" |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
Does my laptop need a 30-pin display connector to use this N133JCG-GT1 REV.C5 screen?
Yes, the panel connects through a 30-pin interface, so the host laptop must provide the matching 30-pin cable.
Will the 13.3-inch 1920x1200 60Hz panel run correctly if my current laptop drives a lower-resolution display?
The screen operates at its native WUXGA 1920x1200 resolution and 60Hz refresh rate; the laptop's graphics must support that mode for proper image output.
How can I verify the screen is performing to its 400 cd/m² brightness and 1500:1 contrast specifications after installation?
Display a full-white field and measure luminance with a calibrated meter; it should read near 400 cd/m², and a checkerboard pattern should yield a 1500:1 contrast ratio.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



