LPScreen
LPScreen MNG007JA1-1 laptop screen 16 inch WUXGA 1920x1200 60Hz 30-pin no touch
A 16-inch WUXGA replacement panel with 1920x1200 resolution, 60Hz refresh, 400 cd/m² brightness and a 30-pin connector
- Compatible ModelsMNG007JA1-1
- Screen Size16”
- Screen ResolutionWUXGA 1920x1200
- 16-inch WUXGA panel gives 1920×1200 workspace
- 400 cd/m² brightness keeps content clear in bright rooms
- 1000:1 contrast ratio adds depth to images and text
- 100 % sRGB colour covers standard creative tasks
- 30-pin connector fits the MNG007JA1-1 chassis directly
16-inch WUXGA replacement panel
This is a new 16-inch WUXGA laptop screen built to replace the MNG007JA1-1 panel. It delivers a 1920x1200 resolution at a 60 Hz refresh rate and connects through a 30-pin interface. The display is non-touch and covers 100 percent sRGB with 16.7 million colours.
Brightness and contrast headroom
Typical brightness reaches 400 cd/m² and the contrast ratio is specified at 1000:1, which is adequate for indoor office work and general media viewing. In brightly lit environments or direct sunlight the 400 cd/m² peak may not overcome glare, and the 60 Hz refresh rate limits motion clarity for fast gaming.
30-pin non-touch connector
The decisive specification is the 30-pin connector combined with the absence of a touch layer. If the original laptop uses a different pin count or requires touch input, this panel will not function as a direct replacement.
Highlights
- 16-inch WUXGA panel gives 1920×1200 workspace
- 400 cd/m² brightness keeps content clear in bright rooms
- 1000:1 contrast ratio adds depth to images and text
- 100 % sRGB colour covers standard creative tasks
- 30-pin connector fits the MNG007JA1-1 chassis directly
Specifications
| Model | MNG007JA1-1 |
|---|---|
| Part Number | MNG007JA1-1 |
| Compatible Models | MNG007JA1-1 |
| Screen Size | 16” |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
Will the 30-pin connector on this 16-inch panel fit the cable already in my laptop?
The screen uses a 30-pin connector; match that pin count and the 1920x1200 WUXGA resolution against your laptop's service manual before ordering.
How can I confirm the 60 Hz refresh rate and 400 cd/m² brightness are active after installation?
Check the display settings in your OS to verify 60 Hz is selected, then use a calibration tool or built-in HDR test pattern to confirm the panel reaches 400 cd/m².
Does the box include mounting brackets or adhesive strips, or must I reuse the originals?
Only the MNG007JA1-1 panel is supplied; brackets, bezel clips and any adhesive are not included and must be sourced from the original display assembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



