LPScreen
LPScreen LP160WU1 16 inch WUXGA 1920x1200 60Hz laptop screen
A 16 inch WUXGA 1920x1200 60Hz laptop replacement screen with 300 cd/m² brightness, 800:1 contrast, 16.7M colours and 89-degree viewing angles
- Compatible ModelsLP160WU1(SP)(H1)
- Screen Size16”
- Screen ResolutionWUXGA 1920x1200
- Crisp 1920x1200 WUXGA detail on a 16 inch panel
- Smooth 60Hz refresh keeps motion clear for daily tasks
- Bright 300 cd/m² output stays readable in lit rooms
- Wide 89-degree viewing angles preserve colour from every side
- 30-pin connector fits the LP160WU1 (SPH1) chassis directly
Replacement 16 inch WUXGA panel
This 16 inch laptop replacement screen delivers a WUXGA 1920x1200 resolution at 60 Hz. It uses a 30-pin connector and provides 300 cd/m² brightness with an 800:1 contrast ratio. The panel reproduces 16.7 million colours and offers wide 89-degree viewing angles in all directions.
Buyers needing a non-touch 16 inch WUXGA display
This unit suits owners of a compatible LP160WU1 (SPH1) chassis who need a direct panel swap without touch functionality. It is not for systems requiring a touchscreen layer, a higher refresh rate, a different pin count or a smaller form factor.
30-pin connector and exact model match
The single decisive specification is the 30-pin interface combined with the LP160WU1 (SPH1) part number; only laptops wired for this exact connector and controller will accept the panel. Verify the part number on the original screen before ordering.
Highlights
- Crisp 1920x1200 WUXGA detail on a 16 inch panel
- Smooth 60Hz refresh keeps motion clear for daily tasks
- Bright 300 cd/m² output stays readable in lit rooms
- Wide 89-degree viewing angles preserve colour from every side
- 30-pin connector fits the LP160WU1 (SPH1) chassis directly
Specifications
| Model | LP160WU1(SP)(H1) |
|---|---|
| Part Number | LP160WU1(SP)(H1) |
| Compatible Models | LP160WU1(SP)(H1) |
| Screen Size | 16” |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
How do I fit the LP160WU1 screen and which step is often missed?
Disconnect the battery, remove the bezel, unscrew the old panel, unplug its 30‑pin connector, plug in the new screen, test before reassembly. People often forget to reconnect the battery before the first boot.
What part of the LP160WU1 will likely need replacement first?
The LED backlight is rated for thousands of hours; when brightness drops below the 300 cd/m² spec or uneven lighting appears, the panel itself must be swapped.
At what point does the LP160WU1 hit its limit during long sessions?
The 60 Hz refresh rate and 300 cd/m² brightness are fixed; sustained use cannot exceed those figures, so motion clarity and peak luminance are the first constraints.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



