LPScreen
LPScreen LP156WFC-SPM3 15.6" FHD 1920x1080 60Hz laptop screen
15.6 inch non-touch display with 1920x1080 resolution, 60Hz refresh rate, 250 cd/m² brightness, 700:1 contrast, 45% NTSC colour and 30-pin connector
- Compatible ModelsLP156WFC(SP)(M3)
- Screen Size15.6"
- Screen ResolutionFull HD (FHD) 1920x1080
- Full HD clarity with 1920 x 1080 resolution
- Smooth motion at 60 Hz refresh rate
- Wide 80° viewing angles on all sides
- 30-pin connector fits the original laptop slot
- 250 cd/m² brightness for indoor use
15.6-inch FHD replacement panel
The LPScreen LP156WFC-SPM3 is a 15.6-inch Full HD laptop display with a 1920x1080 resolution and 60Hz refresh rate. It uses a 30-pin connector and lacks touch functionality. This panel suits owners of compatible laptops needing a direct screen swap.
Replaces cracked or dim LP156WFC series screens
It serves as a direct replacement for the LP156WFC-SPM3 part number. The upgrade is worth it when the original panel has physical damage, backlight failure or dead pixels. Buyers wanting higher refresh rates, touch input or wider colour gamuts should look elsewhere.
60Hz 30-pin eDP interface with 45% NTSC colour
The 30-pin eDP connection limits compatibility to laptops wired for this exact pinout and signalling. The 60Hz refresh rate caps motion smoothness at standard office levels. Colour coverage reaches 45% NTSC at 262K colours, which is adequate for general use but not colour-critical work.
Highlights
- Full HD clarity with 1920 x 1080 resolution
- Smooth motion at 60 Hz refresh rate
- Wide 80° viewing angles on all sides
- 30-pin connector fits the original laptop slot
- 250 cd/m² brightness for indoor use
Specifications
| Model | LP156WFC(SP)(M3) |
|---|---|
| Part Number | LP156WFC(SP)(M3) |
| Compatible Models | LP156WFC(SP)(M3) |
| Screen Size | 15.6" |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Does the 30-pin connector match my existing cable?
Yes, the panel uses a 30-pin interface; verify your laptop’s motherboard pin-out before ordering.
What is the correct sequence for securing the display brackets and cable?
Route the 30-pin cable through the hinge first, seat the panel, then fasten the brackets — reversing the order often pinches the cable.
When will the 250 cd/m² backlight need replacement?
Typical CCFL or LED backlights last several years; plan replacement when brightness drops noticeably below the original 250 cd/m² rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



