LPScreen
LPScreen LP140WU1 laptop screen 14" 1920x1200 60Hz 30-pin no touch
14-inch FHD+ 1920x1200 laptop replacement screen, 60 Hz refresh, 30-pin connector, non-touch, 1000:1 contrast and 85° viewing angles
- Compatible ModelsLP140WU1(SP)(D1)
- Screen Size14"
- Screen ResolutionWUXGA 1920x1200
- Sharp visuals from 1920x1200 FHD+ resolution
- Smooth motion with 60Hz refresh rate
- Wide viewing angles at 85 degrees all sides
- Rich colour depth of 16.7M colours
- Direct fit via 30-pin connector
14 inch FHD+ replacement panel
The LP140WU1 is a 14 inch laptop replacement screen with a WUXGA resolution of 1920x1200. It operates at a 60Hz refresh rate and connects via a 30 pin interface. The panel delivers a 1000:1 contrast ratio and 16.7M colours for standard visual tasks.
Matte non touch display for compatible laptops
This panel suits owners of laptops that use the LP140WU1 (SP)(D1) part number and require a non touch screen. It is not suitable for devices that need a touchscreen layer, a different connector pin count, or a higher refresh rate than 60Hz. Buyers who want touch input or a different form factor should look at something else.
30 pin connector defines fit
The single specification that decides compatibility is the 30 pin connector paired with the exact LP140WU1 (SP)(D1) model designation. Verify this part number against the original screen before ordering, as the supplier may otherwise send a compatibility model. No other specification overrides this match requirement.
Highlights
- Sharp visuals from 1920x1200 FHD+ resolution
- Smooth motion with 60Hz refresh rate
- Wide viewing angles at 85 degrees all sides
- Rich colour depth of 16.7M colours
- Direct fit via 30-pin connector
Specifications
| Model | LP140WU1(SP)(D1) |
|---|---|
| Part Number | LP140WU1(SP)(D1) |
| Compatible Models | LP140WU1(SP)(D1) |
| Screen Size | 14" |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
Will the 30-pin connector on this 14-inch screen plug straight into my laptop's existing cable?
The panel uses a 30-pin interface; verify that your laptop's video cable has the matching 30-pin plug before fitting it.
Can I keep my current 60 Hz panel and swap only the display assembly without changing any other hardware?
Yes, this is a direct 60 Hz replacement with the same 1920x1200 resolution, so the rest of your laptop hardware stays unchanged.
How can I confirm the screen is running at the correct 1920x1200 resolution after installation?
Open your operating system's display settings and check that the detected resolution reads 1920x1200 at 60 Hz.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



