We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
13.3 inch touchscreen display assembly with 40 pin connector

LPScreen

LPScreen LP133WQ1-SPK3 13.3" WQXGA 2560x1600 60Hz Touch laptop screen

SKU CH-8H62-04EV4 MPN LP133WQ1-SPK3

A 13.3" WQXGA touch display assembly with 2560x1600 resolution, 60Hz refresh, 99% sRGB colour and a 40-pin connector

  • Compatible ModelsLP133WQ1-SPK3-Assembly
  • Screen Size13.3"
  • Screen ResolutionWQXGA 2560x1600
  • WQXGA 2560x1600 resolution delivers sharp detail on a 13.3" panel
  • 99% sRGB colour coverage reproduces accurate hues for creative work
  • 340 cd/m² brightness ensures clear visibility in varied lighting
  • 1600:1 contrast ratio produces deep blacks and bright whites
  • 40-pin connector with touch support enables direct drop-in replacement

Replacement display for HP ENVY x360 13-BF

This 13.3-inch WQXGA panel matches the LP133WQ1-SPK3 part number and delivers 2560x1600 resolution at 60 Hz. It includes a touch layer and a 40-pin connector for direct fitment. The assembly targets owners of the compatible HP convertible who need a factory-specification screen swap.

Upgrade from cracked or dim panels

The unit replaces a damaged original or a panel suffering backlight fade, dead pixels, or touch-digitiser failure. A jump to this assembly is worthwhile when the existing glass is shattered, colour accuracy has drifted below 99 % sRGB, or the touch response has become unreliable. It restores the native 340 cd/m² brightness and 1600:1 contrast without altering the laptop’s form factor.

Straightforward drop-in installation

The display ships as a complete assembly with the 40-pin cable pre-routed, so only the bezel screws and hinge covers need removal. Common pitfalls are forgetting to disconnect the battery before unplugging the video cable, overtightening the bezel clips and cracking the new glass, or ordering the wrong variant when multiple LP133WQ1 sub-models exist. Verifying the exact part number on the old sticker avoids returns.

Highlights

  • WQXGA 2560x1600 resolution delivers sharp detail on a 13.3" panel
  • 99% sRGB colour coverage reproduces accurate hues for creative work
  • 340 cd/m² brightness ensures clear visibility in varied lighting
  • 1600:1 contrast ratio produces deep blacks and bright whites
  • 40-pin connector with touch support enables direct drop-in replacement

Specifications

ModelLP133WQ1-SPK3-Assembly
Part NumberLP133WQ1-SPK3-Assembly
Compatible ModelsLP133WQ1-SPK3-Assembly
Screen Size13.3"
Screen ResolutionWQXGA 2560x1600

Questions about this item

Will the 40-pin connector and 13.3-inch dimensions match the display cavity in my HP ENVY x360 13-BF?

The assembly is built to the 13.3-inch WQXGA form factor with a 40-pin interface, matching the factory specifications for the HP ENVY x360 13-BF series.

During installation, do I need to route the touch-digitiser flex through the hinge before securing the bezel clips?

Yes — feed the touch flex cable through the hinge channel first, then seat the panel and snap the bezel; reversing the order traps the cable and prevents the lid from closing.

If the 340 cd/m² backlight dims unevenly over time, can the panel be swapped without replacing the touch layer?

The display ships as a bonded assembly; the touch sensor and LCD are fused, so any backlight degradation requires replacing the full module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.