LPScreen
LPScreen LP133WQ1-SPF1 13.3" WQXGA 2560x1600 60Hz laptop screen
A 13.3 inch WQXGA 2560x1600 laptop replacement screen with 60Hz refresh rate, 1300:1 contrast ratio, 16.7M colours, 40-pin connector and 85-degree viewing angles, supplied without touch functionality
- Compatible ModelsLP133WQ1-SPF1
- Screen Size13.3"
- Screen ResolutionWQXGA 2560x1600
- Sharp WQXGA 2560x1600 detail on a 13.3" panel
- Smooth 60 Hz refresh for fluid everyday motion
- High 1300:1 contrast adds depth to dark scenes
- Wide 85° viewing angles keep colours consistent from the side
- 40-pin connector fits the LP133WQ1-SPF1 chassis exactly
Exact replacement panel
The LPScreen LP133WQ1-SPF1 is a 13.3 inch WQXGA display built as a direct replacement for the same part number. It matches the original 2560x1600 resolution and 60Hz refresh rate for compatible laptops.
40 pin connector, non touch
A 40 pin connector provides the video link and the panel ships without a touch layer. Wide 85 degree viewing angles in all four directions keep colours consistent when the screen is tilted.
1300:1 contrast ratio
The 1300:1 contrast ratio determines black depth and overall image punch for this model. Buyers who need higher contrast or a touch enabled panel should look for a different part.
Highlights
- Sharp WQXGA 2560x1600 detail on a 13.3" panel
- Smooth 60 Hz refresh for fluid everyday motion
- High 1300:1 contrast adds depth to dark scenes
- Wide 85° viewing angles keep colours consistent from the side
- 40-pin connector fits the LP133WQ1-SPF1 chassis exactly
Specifications
| Model | LP133WQ1-SPF1 |
|---|---|
| Part Number | LP133WQ1-SPF1 |
| Compatible Models | LP133WQ1-SPF1 |
| Screen Size | 13.3" |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
What does the 40-pin connector cap in practice?
The 40-pin connector carries the WQXGA 2560x1600 signal at 60 Hz; bandwidth beyond that is limited by the panel's own timing controller.
What clearance does the 13.3-inch panel need to fit?
The panel matches the standard 13.3-inch form factor; verify your laptop's bezel and bracket dimensions against the original LP133WQ1-SPF1 specifications before ordering.
How is the screen installed and what step is often missed?
Disconnect power and battery, remove the bezel, swap the panel using the 40-pin connector, then reseat the bezel; the step most often missed is reconnecting the battery before testing the display.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



