LPScreen
LPScreen LP125WF2 (SP)(B1) laptop screen 12.5" FHD 1920x1080 IPS 60Hz 30-pin
12.5 inch IPS panel with 1920x1080 resolution, 60Hz refresh, 400 cd/m² brightness and 30-pin connector
- Compatible ModelsLP125WF2(SP)(B1)
- Screen Size12.5”
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp FHD detail from 1920x1080 IPS panel
- Wide 80-degree viewing angles for clear off-centre viewing
- Bright 400 cd/m² output suits well-lit spaces
- 60 Hz refresh delivers smooth everyday motion
- Exact 30-pin fit for LP125WF2 (SP)(B1) models
12.5-inch FHD IPS replacement panel
This 12.5-inch display replaces the LP125WF2 (SP)(B1) panel in compatible laptops. It delivers a 1920x1080 resolution on an IPS substrate with a 60 Hz refresh rate. The 30-pin connector matches the original fitting. Buyers who need a touch-enabled screen or a different pin count should look elsewhere.
Thermals and power in daily use
The panel operates at a typical brightness of 400 cd/m² with a 700:1 contrast ratio. IPS technology provides 80-degree viewing angles in all four directions. Colour coverage reaches 262K colours at 50% NTSC. No backlight or inverter is included with the screen itself.
Upgrading from a damaged or lower-spec panel
This unit serves as a direct swap for a cracked, dim or faulty LP125WF2 (SP)(B1) screen. It restores the original 1920x1080 60 Hz specification without adding higher refresh rates or wider gamut. The jump is worthwhile when the existing panel has failed or shows permanent image defects.
Highlights
- Sharp FHD detail from 1920x1080 IPS panel
- Wide 80-degree viewing angles for clear off-centre viewing
- Bright 400 cd/m² output suits well-lit spaces
- 60 Hz refresh delivers smooth everyday motion
- Exact 30-pin fit for LP125WF2 (SP)(B1) models
Specifications
| Model | LP125WF2(SP)(B1) |
|---|---|
| Part Number | LP125WF2(SP)(B1) |
| Compatible Models | LP125WF2(SP)(B1) |
| Screen Size | 12.5” |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I install the 30-pin connector without damaging the pins?
Align the 30-pin connector carefully with the motherboard socket before applying even pressure; the step most people miss is forgetting to disconnect the battery first, which can short the delicate pins.
Will the backlight or colour accuracy degrade first over time?
The LED backlight typically dims noticeably before the 262K colour reproduction shifts, so plan for a backlight-related replacement after several years of daily use.
At what brightness does the 700:1 contrast ratio start to wash out during long sessions?
Sustained use at the maximum 400 cd/m² setting reduces perceived contrast first; lowering brightness slightly preserves the 700:1 ratio during extended work periods.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



