LPScreen
LPScreen LM156LFCL11 15.6" FHD 1920x1080 60Hz laptop screen
A 15.6-inch Full HD laptop replacement panel with 1920x1080 resolution, 60 Hz refresh, 220 cd/m² brightness, 1000:1 contrast and a 30-pin connector
- Compatible ModelsLM156LFCL11
- Screen Size15.6"
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail at 1920x1080 resolution
- Wide 85-degree viewing angles on all four sides
- Smooth 60 Hz refresh for everyday tasks
- 30-pin connector fits LM156LFCL11 models directly
- Bright 220 cd/m² panel with 1000:1 contrast
15.6-inch FHD replacement panel
This is a brand-new 15.6-inch laptop display with a 1920x1080 Full HD resolution and a 60Hz refresh rate. It uses a 30-pin connector and delivers 220 cd/m² brightness with a 1000:1 contrast ratio. The panel is designed as a direct replacement for the LM156LFCL11 model.
Non-touch, 45% NTSC colour
Buyers needing a touchscreen should look elsewhere, as this panel has no touch layer. The 262K colour depth and 45% NTSC gamut suit general office work and media playback, but not colour-critical photo or video editing. Wide 85-degree viewing angles help when sharing the screen.
30-pin connector compatibility
The single specification that decides fit is the 30-pin video connector; your laptop must use this exact interface. Verify the part number LM156LFCL11 on your original screen before ordering, as connector pin-count and pin-out are not interchangeable with other 15.6-inch panels.
Highlights
- Sharp Full HD detail at 1920x1080 resolution
- Wide 85-degree viewing angles on all four sides
- Smooth 60 Hz refresh for everyday tasks
- 30-pin connector fits LM156LFCL11 models directly
- Bright 220 cd/m² panel with 1000:1 contrast
Specifications
| Model | LM156LFCL11 |
|---|---|
| Part Number | LM156LFCL11 |
| Compatible Models | LM156LFCL11 |
| Screen Size | 15.6" |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Does my laptop need a 30-pin video connector to use this LM156LFCL11 screen?
Yes, the panel uses a 30-pin connector, so the host laptop must provide a matching 30-pin LVDS or eDP interface for the display to work.
Can I keep my existing 60 Hz panel cable when swapping to this 15.6 inch FHD replacement?
If the original cable is also a 30-pin type rated for 1920x1080 at 60 Hz it can be reused; otherwise a compatible 30-pin cable is required.
How do I verify the screen is running at the correct 1920x1080 60 Hz setting after installation?
Open the display settings in your operating system and confirm the resolution shows 1920x1080 with a 60 Hz refresh rate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



