LPScreen
LPScreen LM140LF2L02 laptop screen 14" FHD 1920x1080 60Hz 30-pin
14-inch Full HD laptop replacement screen with 60 Hz refresh, 30-pin connector, 250 cd/m² brightness and 1000:1 contrast
- Compatible ModelsLM140LF2L02
- Screen Size14"
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 14 inch Full HD clarity at 1920x1080 resolution
- Smooth 60Hz refresh rate for fluid everyday visuals
- Wide 89 degree viewing angles maintain colour consistency
- 30 pin connector ensures direct drop-in compatibility
- 250 cd/m² brightness with 1000:1 contrast for balanced image quality
14-inch FHD 60 Hz replacement screen
This 14-inch panel delivers a Full HD 1920x1080 image at 60 Hz. It uses a 30-pin connector and offers 250 cd/m² brightness with a 1000:1 contrast ratio. Viewing angles reach 89 degrees in every direction for consistent colour from the sides.
Ideal for exact model replacement.
The screen matches the LM140LF2L02 part number and fits laptops built for this specific panel. Buyers who need touch input should look elsewhere because this unit has no touch layer. Users requiring wider colour coverage will find the 45% NTSC gamut limiting for colour-critical work.
30-pin connector decides fit
Compatibility hinges on the 30-pin interface; the panel will not connect to laptops wired for a different pin count. Verify the original screen uses the same 30-pin layout before ordering.
Highlights
- Sharp 14 inch Full HD clarity at 1920x1080 resolution
- Smooth 60Hz refresh rate for fluid everyday visuals
- Wide 89 degree viewing angles maintain colour consistency
- 30 pin connector ensures direct drop-in compatibility
- 250 cd/m² brightness with 1000:1 contrast for balanced image quality
Specifications
| Model | LM140LF2L02 |
|---|---|
| Part Number | LM140LF2L02 |
| Compatible Models | LM140LF2L02 |
| Screen Size | 14" |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I install the 30-pin connector on the LM140LF2L02 without damaging the pins?
Align the 30-pin cable squarely with the socket, press straight in until it seats, then lock the retaining flap; forcing it at an angle bends the fine pins and causes lines or no image.
What part of the LM140LF2L02 is most likely to need replacement after extended use?
The LED backlight driving the 250 cd/m² output dims gradually over years; when brightness becomes insufficient the whole panel is swapped because the backlight is not separately serviceable.
Which limit of the LM140LF2L02 appears first during long sessions at full brightness?
Sustained maximum brightness pushes the backlight temperature up, and the 250 cd/m² output will drift lower before the 60 Hz refresh or 1000:1 contrast becomes an issue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



