LPScreen
LPScreen B160UAN03.3 16 inch WUXGA 1920x1200 60Hz Without Touch laptop screen
A 16 inch WUXGA 1920x1200 60Hz non-touch replacement panel with 300 cd/m² brightness, 1200:1 contrast, 16.7M colours and 85° viewing angles
- Compatible ModelsB160UAN03.3
- Screen Size16”
- Screen ResolutionWUXGA 1920x1200
- Sharp WUXGA detail at 1920x1200 resolution
- Smooth 60 Hz refresh for fluid motion
- Wide 85° viewing angles on every side
- 300 cd/m² brightness for clear indoor use
- 7 M colours covering 45% NTSC gamut
16 inch WUXGA replacement screen
This LPScreen B160UAN03.3 panel measures 16 inches diagonally and delivers a WUXGA 1920x1200 resolution at 60Hz. It is a non-touch display built as a direct replacement for the B160UAN03.3 part number. The matte finish suits office work, study and general multimedia use.
Upgrade from lower resolution or damaged panels
Swapping to this screen restores 16.7 million colours at 45% NTSC with a 1200:1 contrast ratio and 300 cd/m² brightness. The jump is worth it when your current panel is cracked, suffers backlight bleed or runs at a lower pixel density. It also matches the original 60Hz refresh timing exactly.
Verify the exact part number before ordering
Confirm that your laptop requires the B160UAN03.3 model and a 16 inch non-touch WUXGA panel with identical connector placement. The 85/85/85/85 viewing angles and 60Hz refresh are fixed specifications. Email your requirements after purchase if you need assurance on connector compatibility.
Highlights
- Sharp WUXGA detail at 1920x1200 resolution
- Smooth 60 Hz refresh for fluid motion
- Wide 85° viewing angles on every side
- 300 cd/m² brightness for clear indoor use
- 7 M colours covering 45% NTSC gamut
Specifications
| Model | B160UAN03.3 |
|---|---|
| Part Number | B160UAN03.3 |
| Compatible Models | B160UAN03.3 |
| Screen Size | 16” |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
What are the exact dimensions and connector details for the B160UAN03.3 16 inch WUXGA panel?
The panel measures 16 inches diagonally with a 1920x1200 resolution. Match the original B160UAN03.3 part number and verify the 30-pin eDP connector location on your cable before ordering.
Which steps ensure the 60Hz non-touch display installs without backlight issues?
Disconnect the battery first. Route the 30-pin eDP cable clear of the hinge, seat the connector fully, and test the 300 cd/m² panel before reassembling the bezel to avoid pinched wires.
When should the 45% NTSC colour gamut screen be replaced again?
Replace if the 1200:1 contrast drops visibly, the 300 cd/m² brightness fades unevenly, or the 16.7M colour output shows persistent lines or dead pixels after the 60Hz panel ages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



