LPScreen
LPScreen B160UAN01.J 16 inch WUXGA 1920x1200 165Hz laptop screen
A 16 inch WUXGA laptop replacement panel running at 165 Hz with 300 cd/m² brightness, 1200:1 contrast and 100 % sRGB colour
- Compatible ModelsB160UAN01.J
- Screen Size16”
- Screen ResolutionWUXGA 1920x1200
- Sharp 165 Hz refresh for smooth motion
- WUXGA 1920x1200 resolution gives crisp detail
- 100 % sRGB colour covers standard gamut
- 300 cd/m² brightness suits indoor use
- 1200:1 contrast adds depth to dark scenes
Replacement screen specifications
This new LPScreen B160UAN01.J is a 16 inch WUXGA laptop replacement screen. It delivers a 1920x1200 resolution at a 165Hz refresh rate. The panel operates without touch functionality. Brightness reaches 300 cd/m² with a 1200:1 contrast ratio.
Compatibility and use cases
The part matches the exact B160UAN01.J model number for direct replacement. It suits repair technicians and owners restoring a damaged 16 inch panel. Buyers who need touch input should look elsewhere. Those requiring a different connector layout or mounting points must verify fit before ordering.
Deciding specification
The 165Hz refresh rate is the single figure that determines suitability for high-motion content. A 60Hz or 120Hz panel will not provide the same motion clarity. Confirm the original screen runs at 165Hz before purchasing.
Highlights
- Sharp 165 Hz refresh for smooth motion
- WUXGA 1920x1200 resolution gives crisp detail
- 100 % sRGB colour covers standard gamut
- 300 cd/m² brightness suits indoor use
- 1200:1 contrast adds depth to dark scenes
Specifications
| Model | B160UAN01.J |
|---|---|
| Part Number | B160UAN01.J |
| Compatible Models | B160UAN01.J |
| Screen Size | 16” |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
Does my laptop need a 30-pin eDP connector to run this B160UAN01.J panel?
Yes, this 16 inch WUXGA 1920x1200 165Hz screen uses a standard 30-pin eDP interface; your motherboard must provide the matching connector and cable.
Will my existing 60 Hz display cable and GPU drive the 165 Hz refresh without artefacts?
The panel refreshes at 165 Hz; your GPU and eDP cable must both support that rate, otherwise the image will fall back to a lower frequency.
How can I verify the 300 cd/m² brightness and 1200:1 contrast are performing correctly after installation?
Display a full-white pattern and measure luminance with a colorimeter — it should read near 300 cd/m² — then check a black-to-white step chart for a 1200:1 contrast ratio.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



