We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
16 inch WUXGA touch laptop screen with 40 pin connector

LPScreen

LPScreen B160UAK01.2 16 inch WUXGA 1920x1200 60Hz touch laptop screen

SKU CH-4PNN-NCEHF MPN B160UAK01.2

A 16 inch WUXGA 1920x1200 60Hz touch panel with a 40 pin connector and 85 degree viewing angles

  • Compatible ModelsB160UAK01.2
  • Screen Size16”
  • Screen ResolutionWUXGA 1920x1200
  • WUXGA 1920x1200 resolution gives sharp detail on a 16 inch panel
  • 60 Hz refresh rate keeps everyday motion smooth
  • Touch input adds direct control for apps and navigation
  • 40 pin connector fits the original B160UAK01.2 socket
  • 85 degree viewing angles preserve colour from wide positions

Exact Model Match

This 16 inch WUXGA panel carries the exact part number B160UAK01.2 and delivers a 1920x1200 resolution at 60Hz. It is built as a direct replacement for laptops that originally shipped with this specific screen assembly. The integrated touch layer means the display arrives ready for pen and finger input without extra parts. Buyers restoring a damaged panel to factory specification will find the correct fit here.

Connector And Form Factor

Verify that the original screen uses a 40 pin video connector before ordering. The replacement matches the factory pinout, so the existing cable should seat without adapters. Confirm the chassis opening accepts a 16 inch diagonal panel and that the mounting brackets align with the original screw posts. The wide 85 degree viewing angles in all four directions indicate an IPS type matrix, but the bezel and hinge clearance must still match your specific laptop model.

Touch Integration In A Build

The touch digitiser is bonded to the glass, so the single ribbon carries both video and touch signals through the same 40 pin interface. No separate USB or I2C cable is required, freeing an internal header for other devices. Because the panel draws power from the laptop’s embedded display controller, no external supply is needed. Installers should route the flat cable clear of hinge pivots and fan exhaust to maintain reliable contact over the device’s service life.

Highlights

  • WUXGA 1920x1200 resolution gives sharp detail on a 16 inch panel
  • 60 Hz refresh rate keeps everyday motion smooth
  • Touch input adds direct control for apps and navigation
  • 40 pin connector fits the original B160UAK01.2 socket
  • 85 degree viewing angles preserve colour from wide positions

Specifications

ModelB160UAK01.2
Part NumberB160UAK01.2
Compatible ModelsB160UAK01.2
Screen Size16”
Screen ResolutionWUXGA 1920x1200

Questions about this item

Does the B160UAK01.2 screen arrive with any mounting brackets or cables, or do I need to reuse the ones from my old panel?

The screen is supplied as the panel only; you will reuse the existing brackets, screws and the 40‑pin cable from the original display.

I see only one part number listed — B160UAK01.2 — so there is no choice of resolution or refresh rate to make, correct?

Correct; this model is a 16‑inch WUXGA 1920x1200 panel running at 60 Hz with touch, and no alternative specifications are offered for this part number.

What does the 85/85/85/85 viewing‑angle figure mean when I am working at the laptop?

It indicates 85‑degree visibility up, down, left and right, so colours and contrast stay consistent even when you view the screen from steep side angles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.