LPScreen
LPScreen B160UAK01.0 16 inch WUXGA 1920x1200 60Hz Touch laptop screen
A 16 inch WUXGA touch display with 1920x1200 resolution, 60Hz refresh, 250 cd/m² brightness and a 40-pin connector
- Compatible ModelsB160UAK01.0
- Screen Size16”
- Screen ResolutionWUXGA 1920x1200
- 16 inch WUXGA resolution delivers sharp 1920x1200 detail
- 60 Hz refresh keeps motion smooth for everyday tasks
- 250 cd/m² brightness ensures clear visibility indoors
- 1000:1 contrast ratio produces deep blacks and bright whites
- 40 pin connector matches the original laptop interface
16 inch WUXGA touch replacement panel
This new LPScreen B160UAK01.0 panel fits laptops that specify the exact 16 inch WUXGA 1920x1200 60Hz touch assembly. It delivers 250 cd/m² brightness, 1000:1 contrast and 16.7M colours at 45% NTSC across 85 degree viewing angles.
Swapping a damaged or non‑touch 16 inch display
The part replaces a cracked, dim or non‑touch 16 inch screen with the same 40‑pin connector and 60Hz refresh rate. The upgrade is worth it when the original panel has failed or when touch input is required for the device’s workflow.
Integration into a 16 inch laptop chassis
The screen mounts inside a 16 inch lid using the factory screw points and connects through the existing 40‑pin eDP cable. It frees the user from a broken display without needing a new laptop, provided the chassis accepts the B160UAK01.0 form factor.
Highlights
- 16 inch WUXGA resolution delivers sharp 1920x1200 detail
- 60 Hz refresh keeps motion smooth for everyday tasks
- 250 cd/m² brightness ensures clear visibility indoors
- 1000:1 contrast ratio produces deep blacks and bright whites
- 40 pin connector matches the original laptop interface
Specifications
| Model | B160UAK01.0 |
|---|---|
| Part Number | B160UAK01.0 |
| Compatible Models | B160UAK01.0 |
| Screen Size | 16” |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
Will the 40-pin connector on this B160UAK01.0 panel reach the motherboard socket on a 16-inch chassis?
The panel uses a 40-pin connector designed for the B160UAK01.0 model; cable length matches the original 16-inch layout so it reaches the motherboard socket without extension.
Which step do installers most often miss when fitting the touch-enabled B160UAK01.0 screen?
After seating the 40-pin connector, the touch flex cable must be plugged into its separate ZIF socket on the mainboard; skipping this leaves the touch layer inactive.
If the backlight dims on this 250 cd/m² panel years later, what component is replaced?
The LED backlight is integrated into the 16-inch WUXGA panel, so a dimming fault means replacing the entire B160UAK01.0 screen assembly rather than a separate inverter or lamp.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



