LPScreen
LPScreen B160QAN02.P 16" WQXGA 2560x1600 120Hz laptop screen
16-inch WQXGA 2560x1600 IPS panel at 120 Hz with 400 cd/m² brightness, 1000:1 contrast, 100% DCI-P3 colour and a 40-pin connector
- Compatible ModelsB160QAN02.P
- Screen Size16”
- Screen ResolutionWQXGA 2560x1600
- Sharp 16-inch detail at 2560x1600 WQXGA resolution
- Smooth 120 Hz refresh for fluid motion
- Wide 100 % DCI-P3 colour with 1.06 billion shades
- Bright 400 cd/m² panel and 1000:1 contrast
- 40-pin connector fits B160QAN02.P models
Compatibility & Fit
This replacement panel matches the B160QAN02.P part number for 16” laptops. It uses a 40-pin connector and a standard mounting layout. Buyers who need a different pin count or a touch-enabled layer should look elsewhere. Verify the exact model on your original screen before ordering.
Resolution, Refresh & Colour
The display delivers WQXGA 2560x1600 resolution at 120 Hz with 1.06B colours covering 100% DCI-P3. Brightness reaches 400 cd/m² and contrast sits at 1000:1. Users who require higher refresh rates, HDR certification or a wider gamut will not find those features here.
Connector Decides Fit
The 40-pin interface is the single specification that determines whether this panel works in your chassis. An exact match to B160QAN02.P ensures correct signalling and mechanical alignment. If your device uses a different pin arrangement or an embedded touch controller, this screen will not connect.
Highlights
- Sharp 16-inch detail at 2560x1600 WQXGA resolution
- Smooth 120 Hz refresh for fluid motion
- Wide 100 % DCI-P3 colour with 1.06 billion shades
- Bright 400 cd/m² panel and 1000:1 contrast
- 40-pin connector fits B160QAN02.P models
Specifications
| Model | B160QAN02.P |
|---|---|
| Part Number | B160QAN02.P |
| Compatible Models | B160QAN02.P |
| Screen Size | 16” |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
Will the 40-pin connector on this B160QAN02.P panel mate with the existing cable in my laptop?
The screen uses a 40-pin interface; match that pin count and the 2560x1600 120 Hz specification against your service manual before fitting.
How can I confirm the 120 Hz refresh rate and 100% DCI-P3 colour are active after installation?
Open the OS display settings or GPU control panel and verify the mode reads 2560x1600 at 120 Hz; a colour-profile tool should report 100% DCI-P3 coverage.
Does the box include mounting brackets or adhesive strips, or must I source them separately?
Only the 16-inch B160QAN02.P panel is supplied; brackets, bezel clips and adhesive are not included and must be obtained separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



