LPScreen
LPScreen B133UAN01.4 13.3" WUXGA 1920x1200 60Hz laptop screen
A 13.3 inch WUXGA 1920x1200 60Hz replacement laptop screen with 250 cd/m² brightness and 30-pin connector
- Compatible ModelsB133UAN01.4
- Screen Size13.3"
- Screen ResolutionWUXGA 1920x1200
- Sharp text with WUXGA 1920x1200 resolution
- Smooth motion from 60Hz refresh rate
- Wide viewing angles of 85 degrees each side
- Accurate colour via 16.7M colour depth
- Easy install with 30-pin connector fit
Replacement screen specification
This is a 13.3 inch WUXGA replacement panel with 1920x1200 resolution and a 60Hz refresh rate. It uses a 30 pin connector and delivers 250 cd/m² brightness with an 800:1 contrast ratio. The display reproduces 16.7M colours covering 45% NTSC and offers 85 degree viewing angles in four directions. It is a non-touch screen sold new.
Intended use and limitations
Suitable for owners of laptops that originally used the B133UAN01.4 panel and who need a direct replacement without touch capability. Builders whose device requires a touch digitizer, a different pin count, or a higher refresh rate should look elsewhere. Buyers who need a brighter panel or wider colour gamut will not be served by this model.
Critical compatibility check
The single specification that decides fit is the exact part number B133UAN01.4 matching the original screen label. Verify the 30 pin connector and 13.3 inch size against the removed panel before ordering. Email the exact model requirement after purchase if you need confirmation that the shipped unit matches this specific part.
Highlights
- Sharp text with WUXGA 1920x1200 resolution
- Smooth motion from 60Hz refresh rate
- Wide viewing angles of 85 degrees each side
- Accurate colour via 16.7M colour depth
- Easy install with 30-pin connector fit
Specifications
| Model | B133UAN01.4 |
|---|---|
| Part Number | B133UAN01.4 |
| Compatible Models | B133UAN01.4 |
| Screen Size | 13.3" |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
Does the 13.3 inch B133UAN01.4 panel use a 30 pin connector for installation?
Yes, the B133UAN01.4 screen connects via a 30 pin interface.
What is the common mistake when fitting the 30 pin connector on the B133UAN01.4 display?
The connector must be fully seated and the retaining latch locked; a partial insert causes flicker or no image.
When should the B133UAN01.4 screen be replaced due to backlight ageing?
Replace the panel when brightness drops well below the rated 250 cd/m² or the 800:1 contrast degrades noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



