LPScreen
LPScreen B133UAN01.0 HW0A 13.3" WUXGA 1920x1200 60Hz laptop screen
A 13.3 inch WUXGA 1920x1200 60Hz laptop replacement screen with 300 cd/m² brightness, 800:1 contrast, 100% sRGB colour and a 30-pin connector
- Compatible ModelsB133UAN01.0HW0A
- Screen Size13.3"
- Screen ResolutionWUXGA 1920x1200
- Sharp WUXGA 1920x1200 detail on a 13.3" panel
- Vivid 16.7M colours covering 100% sRGB gamut
- Wide 85° viewing angles in all four directions
- Standard 30-pin connector for direct laptop fit
- Bright 300 cd/m² output with 800:1 contrast
Product Identity
This is a 13.3 inch WUXGA laptop replacement screen built for the B133UAN01.0 HW0A part number. It targets repair technicians and owners who need a direct panel swap without touch functionality. Buyers who require a touch-enabled display or a different connector layout cannot use this unit.
Deciding Specification
The panel uses a 30 pin connector and delivers 1920x1200 resolution at 60Hz refresh. Matching this exact connector and resolution is the single check that confirms fitment before purchase.
Thermals Noise Power
As a passive display component it generates no audible noise and draws minimal power from the laptop's internal supply. Surface temperature remains low during normal operation and the 300 cd/m² brightness at 800:1 contrast is achieved without active cooling.
Highlights
- Sharp WUXGA 1920x1200 detail on a 13.3" panel
- Vivid 16.7M colours covering 100% sRGB gamut
- Wide 85° viewing angles in all four directions
- Standard 30-pin connector for direct laptop fit
- Bright 300 cd/m² output with 800:1 contrast
Specifications
| Model | B133UAN01.0HW0A |
|---|---|
| Part Number | B133UAN01.0HW0A |
| Compatible Models | B133UAN01.0HW0A |
| Screen Size | 13.3" |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
How bright will 300 cd/m² look on a 13.3" WUXGA panel in normal indoor light?
At 300 cd/m² the 13.3" WUXGA panel provides clear visibility for office work and web browsing under typical indoor lighting without appearing washed out.
What does the 30-pin connector limit when fitting this B133UAN01.0 HW0A screen?
The 30-pin connector matches the original B133UAN01.0 HW0A pinout, so it carries the 1920x1200 60Hz signal and 16.7M colour data exactly as the factory panel did.
Will the 13.3" 1920x1200 panel with 85/85/85/85 viewing angles fit my existing bezel and hinge brackets?
The panel follows the standard 13.3" WUXGA form factor for the B133UAN01.0 series, so existing bezel clips and hinge brackets align without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



