LPScreen
LPScreen B133QAN03.3 13.3" WQXGA 2560x1600 60Hz laptop screen
A 13.3 inch WQXGA replacement panel delivering 2560x1600 resolution at 60Hz with 400 cd/m² brightness and 100% sRGB colour
- Compatible ModelsB133QAN03.3
- Screen Size13.3"
- Screen ResolutionWQXGA 2560x1600
- Sharp 13.3" WQXGA detail from 2560x1600 resolution
- Accurate colour work with 100% sRGB 16.7M colours
- Bright 400 cd/m² output for clear indoor viewing
- Wide 85° viewing angles maintain image quality off-centre
- Direct 40-pin fit for B133QAN03.3 replacement
13.3" WQXGA non-touch panel
This 13.3 inch display replaces a B133QAN03.3 panel with WQXGA 2560x1600 resolution and 60Hz refresh rate. It delivers 400 cd/m² brightness, 1200:1 contrast and 100% sRGB colour across 16.7M colours. The 40-pin connector fits the original mounting points.
Buyers needing a direct swap for a cracked
This part suits anyone restoring the exact factory specification without touch function. It will not work for laptops that require a touch-enabled digitiser or a different pin-count interface. Builders wanting higher refresh rates or wider colour gamuts should look elsewhere.
40-pin connector compatibility
The single detail that decides fit is the 40-pin video connector matching the B133QAN03.3 part number. Verify the original screen uses this exact pin layout before ordering; a different connector count will prevent installation.
Highlights
- Sharp 13.3" WQXGA detail from 2560x1600 resolution
- Accurate colour work with 100% sRGB 16.7M colours
- Bright 400 cd/m² output for clear indoor viewing
- Wide 85° viewing angles maintain image quality off-centre
- Direct 40-pin fit for B133QAN03.3 replacement
Specifications
| Model | B133QAN03.3 |
|---|---|
| Part Number | B133QAN03.3 |
| Compatible Models | B133QAN03.3 |
| Screen Size | 13.3" |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
Does the 40-pin connector on this B133QAN03.3 panel support the full WQXGA 2560x1600 resolution at 60Hz?
Yes, the 40-pin interface carries the full WQXGA 2560x1600 signal at the panel's native 60Hz refresh rate.
What bezel dimensions and mounting points does the 13.3-inch B133QAN03.3 require to fit my laptop lid?
The panel is a slim 13.3-inch non-touch module designed to the B133QAN03.3 form factor; match your original part number to ensure the screw holes and bezel clips align.
How do I install the B133QAN03.3 screen, and which step do people most often get wrong?
Disconnect the battery, remove the bezel, swap the 40-pin cable into the new panel, then test before reassembling; the step most often missed is reconnecting the battery only after confirming the display works.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



