LPScreen
LPScreen B133QAN03.0 13.3" WQXGA 2560x1600 60Hz laptop screen
13.3 inch WQXGA 2560x1600 laptop replacement screen with 400 cd/m² brightness, 1200:1 contrast, 100% sRGB colour and 40‑pin connector
- Compatible ModelsB133QAN03.0
- Screen Size13.3"
- Screen ResolutionWQXGA 2560x1600
- Sharp 2560 x 1600 WQXGA resolution reveals fine detail
- 100 % sRGB colour coverage reproduces accurate hues
- 400 cd/m² brightness keeps content clear in bright rooms
- 1200:1 contrast ratio adds depth to dark scenes
- 40-pin connector fits the B133QAN03.0 panel directly
13.3" WQXGA replacement panel
The LPScreen B133QAN03.0 is a 13.3 inch display built as a direct replacement for the same model number. It delivers a 2560x1600 resolution at 60Hz for users who need a precise panel swap without touch functionality.
2560x1600 at 60Hz headroom
The panel shows 16.7 million colours covering 100% sRGB with a 1200:1 contrast ratio and 400 cd/m² brightness. Wide 85-degree viewing angles in four directions keep colour consistent, while the fixed 60Hz refresh caps high-frame-rate gaming or video editing workflows.
40-pin connector power profile
A 40-pin interface carries both signal and power for the backlight, keeping cable routing simple inside thin chassis designs. The matte, non-touch surface avoids extra digitiser layers, so heat output and power draw stay low during typical office or media use.
Highlights
- Sharp 2560 x 1600 WQXGA resolution reveals fine detail
- 100 % sRGB colour coverage reproduces accurate hues
- 400 cd/m² brightness keeps content clear in bright rooms
- 1200:1 contrast ratio adds depth to dark scenes
- 40-pin connector fits the B133QAN03.0 panel directly
Specifications
| Model | B133QAN03.0 |
|---|---|
| Part Number | B133QAN03.0 |
| Compatible Models | B133QAN03.0 |
| Screen Size | 13.3" |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
Will the 40-pin connector on this B133QAN03.0 panel mate with the existing cable in my laptop?
The screen uses a 40-pin interface; match that pin count and the 2560x1600 60 Hz signal against your service manual before fitting.
How can I verify the 100% sRGB colour space and 400 cd/m² brightness are performing correctly after installation?
Run a calibration probe or built-in OS colour tool at native 2560x1600 resolution; the panel should report 16.7 million colours and hit the rated 400 nits at maximum backlight.
Does the box include mounting brackets or adhesive strips, or must I reuse the originals from the old display?
Only the 13.3-inch B133QAN03.0 panel is supplied; brackets, bezel clips and any adhesive are not included and must be sourced from the original assembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



