We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
13.3 inch matte laptop display panel without touch, 40 pin connector

LPScreen

LPScreen B133QAN02.0 13.3" WQXGA 2560x1600 60Hz laptop screen

SKU CH-EDPB-2SEB6 MPN B133QAN02.0

A 13.3 inch WQXGA replacement panel delivering 2560x1600 resolution at 60 Hz with 300 cd/m² brightness, 1200:1 contrast, 100 % sRGB colour and a 40-pin connector

  • Compatible ModelsB133QAN02.0
  • Screen Size13.3"
  • Screen ResolutionWQXGA 2560x1600
  • Sharp WQXGA detail at 2560x1600 resolution
  • Accurate colour with 16.7M colours covering 100% sRGB
  • Bright 300 cd/m² output for clear indoor viewing
  • Wide 85-degree viewing angles on all four sides
  • Ready to fit with 40-pin connector and no touch layer

Replacement screen specifications

This is a 13.3 inch WQXGA laptop replacement screen with a 2560x1600 resolution and a 60Hz refresh rate. It uses a 40-pin connector and delivers 300 cd/m² brightness with a 1200:1 contrast ratio. The panel covers 100% sRGB and offers 85-degree viewing angles in all directions.

Buyers needing touch or higher refresh

This screen suits owners of laptops built for the B133QAN02.0 part who need a non-touch panel with standard 60Hz operation. It is not for buyers who require touch input, a refresh rate above 60Hz, or a different pin-count connector. Shoppers unsure of their exact part number should verify compatibility before ordering.

40-pin connector compatibility

The single specification that decides fit is the 40-pin connector paired with the B133QAN02.0 model number. Only systems designed for this exact pin layout and electrical interface will accept the panel. Match the part number on your original screen to this model before purchase.

Highlights

  • Sharp WQXGA detail at 2560x1600 resolution
  • Accurate colour with 16.7M colours covering 100% sRGB
  • Bright 300 cd/m² output for clear indoor viewing
  • Wide 85-degree viewing angles on all four sides
  • Ready to fit with 40-pin connector and no touch layer

Specifications

ModelB133QAN02.0
Part NumberB133QAN02.0
Compatible ModelsB133QAN02.0
Screen Size13.3"
Screen ResolutionWQXGA 2560x1600

Questions about this item

How do I install the B133QAN02.0 screen and what step do people often get wrong?

Disconnect the battery, remove the bezel, unplug the 40‑pin connector, swap the panel, then reconnect. The step most people miss is forgetting to unplug the battery first, which can short the connector.

What maintenance or replacement will the B133QAN02.0 need later?

No scheduled maintenance is required. If brightness drops below the 300 cd/m² spec or dead pixels appear, the whole panel must be replaced as the backlight is not user‑serviceable.

What limit shows up first on the B133QAN02.0 under sustained use?

The 60 Hz refresh rate caps motion smoothness during long sessions, and the 300 cd/m² brightness ceiling limits visibility in bright environments before any thermal throttle occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.