LPScreen
LPScreen B133QAA01.0 13.3" WQXGA 2560x1600 60Hz touch laptop screen
13.3 inch WQXGA 2560x1600 touch screen with 500 cd/m² brightness, 1500:1 contrast, 100% sRGB and 40-pin connector
- Compatible ModelsB133QAA01.0
- Screen Size13.3"
- Screen ResolutionWQXGA 2560x1600
- Sharp 2560x1600 WQXGA detail on 13.3 inch panel
- 500 cd/m² brightness for clear outdoor viewing
- 100% sRGB 16.7M colours for accurate reproduction
- 1500:1 contrast with 85° wide viewing angles
- 40-pin touch connector fits B133QAA01.0 exactly
13.3" WQXGA Touch Replacement
This 13.3 inch LPScreen panel delivers WQXGA 2560x1600 resolution at 60Hz with touch input. It offers 500 cd/m² brightness, 1500:1 contrast and 16.7M colours covering 100% sRGB. The 40‑pin connector fits the B133QAA01.0 part number directly.
Upgrading from lower resolution
Replacing a standard HD or Full HD panel with this WQXGA display adds 2560x1600 pixels for sharper text and more workspace. The jump is worthwhile when your laptop chassis accepts the 13.3" form factor and the 40‑pin interface matches the original screen exactly.
Verify connector and bezel fit
Confirm the existing screen uses a 40‑pin eDP cable and that the bezel mounting points align with the B133QAA01.0 dimensions. Check that the laptop’s graphics can drive 2560x1600 at 60Hz and that the touch controller is compatible with the replacement digitiser.
Highlights
- Sharp 2560x1600 WQXGA detail on 13.3 inch panel
- 500 cd/m² brightness for clear outdoor viewing
- 100% sRGB 16.7M colours for accurate reproduction
- 1500:1 contrast with 85° wide viewing angles
- 40-pin touch connector fits B133QAA01.0 exactly
Specifications
| Model | B133QAA01.0 |
|---|---|
| Part Number | B133QAA01.0 |
| Compatible Models | B133QAA01.0 |
| Screen Size | 13.3" |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
Will the 40-pin connector and 13.3 inch dimensions match my existing B133QAA01.0 panel?
Yes, this panel uses the same 40-pin connector and 13.3 inch form factor as the original B133QAA01.0, so it aligns with the mounting points and cable routing of that exact model.
What is the correct way to seat the 40-pin ribbon cable during installation?
Insert the 40-pin ribbon fully into the connector until the locking bar clicks, then secure the bar; the common mistake is leaving the bar open, which causes a blank or flickering display.
How long before the 500 cd/m² backlight typically dims enough to need replacement?
The LED backlight is rated for tens of thousands of hours at 500 cd/m²; noticeable dimming usually appears after several years of daily use, at which point the whole panel is swapped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



